Skip to content

Power Stop 14-18 Audi RS7 Front Z26 Extreme Street Brake Pads w/Hardware

Availability:
Only 2 left!

Ships same or next business day

SKU PSBZ26-1291
Original price $73.02 - Original price $73.02
Original price
$73.02
$73.02 - $73.02
Current price $73.02
CALIFORNIA WARNING

Handling passenger or off-highway motor vehicle parts can expose you to chemicals such as phthalates and lead, which can cause cancer and reproductive harm. To minimize exposure, service the vehicle in a well-ventilated area, wear gloves, and wash your hands. For more information see www.P65Warnings.ca.gov/motor-vehicle-parts.

Rewards
EARN REWARD POINTS
Purchasing this product will earn you 365 points to redeem on future purchases. Check your points.
The Power Stop Z26 Street Warrior ceramic brake pads are designed as an upgrade over stock brakes to reduce brake dust & eliminate noise on muscle cars and performance vehicles. These brake pads are made with a low-dust ceramic formula, infused with carbon-fiber to strengthen the compound and provide extreme stopping power. Premium stainless-steel hardware along with ceramic brake lubricant is included with the Z26 brake pads making it easier to complete your brake job. Use Z26 Street Warrior ceramic brake pads to give your muscle car or performance vehicle the extreme stopping power it deserves.

This part also goes by the following cross reference.

Cross Reference Part Number:

About these Brake Pads

The POWERSTOP PSBZ26-1291 brake pads are the friction material that presses against the brake rotors to stop the car. Pad compound affects stopping power, pedal feel, noise and brake dust, and pads are always replaced as a set for both wheels on an axle.

Frequently asked questions

What are the signs that my brake pads are worn?

A brake-pad warning light, a squeal or grinding noise when braking, longer stopping distances, or less than about 3 mm of pad material visible through the wheel. Grinding usually means the backing plate is touching the rotor and needs immediate attention.

Do I need new rotors with new pads?

Check the rotors' thickness against the minimum stamped on them and look for grooves or vibration. Rotors that are worn, scored or below minimum thickness should be replaced with the pads so the new pads bed in on a fresh surface.

Do I need a new pad wear sensor?

On many European cars, yes. The sensor is designed to be worn through by the pad; once the warning has come on, or if the sensor was damaged during removal, it has to be replaced.

How do I break in new brake pads?

Follow the pad maker's bedding procedure, usually several moderate stops from speed without coming to a complete stop, then letting the brakes cool. Avoid hard stops for the first few hundred miles.

How do I make sure this brake pad set fits my car?

Compare the part numbers listed on this page with the number on your old part or in your vehicle's parts catalog, and check the fitment information. If you are unsure, contact us with your VIN before ordering.