Skip to content
Polyurethane Bushes 45 mm for Cast Front Arms - Audi B4 - Steet Hardness
Polyurethane Bushes 45 mm for Cast Front Arms - Audi B4 - Steet Hardness
Polyurethane Bushes 45 mm for Cast Front Arms - Audi B4 - Steet Hardness
Polyurethane Bushes 45 mm for Cast Front Arms - Audi B4 - Steet Hardness

Polyurethane Bushes 45 mm for Cast Front Arms - Audi B4 - Steet Hardness

VERKLINE
Ships from Supplier
SKU pow-002-75
$125.00 - $125.00
$125.00
$125.00 - $125.00
$125.00
CALIFORNIA WARNING

Handling passenger or off-highway motor vehicle parts can expose you to chemicals such as phthalates and lead, which can cause cancer and reproductive harm. To minimize exposure, service the vehicle in a well-ventilated area, wear gloves, and wash your hands. For more information see www.P65Warnings.ca.gov/motor-vehicle-parts.

Rewards
EARN REWARD POINTS
Purchasing this product will earn you 625 points to redeem on future purchases. Check your points.

Set for one axle (both left and right-hand sides included) of polyurethane bushings.

Polyurethane bushings work ideally in performance suspensions. Rubber suspension bushings are a proven compromise in performance vehicles. When additional horsepower is added, plus-size tires then OEM or rubber bushings tend to stress beyond design limits. Polyurethane bushings are strong enough to control movement and maintain wheel alignment. This is a set for one axle. OEM part number 893407181

What’s Included:
– four red polyurethane bushings
– four centering sleeves for the Polyurethane bushings
– grease for fittings the bushings in the wishbone

Features:
– polyurethane bushings size 45 mm
– street stiffness rated 75 ShA

Fitment:
– 45mm Cast Front Iron Arms – Audi B3/B4

Oem part number a 893 407 181

This part also goes by the following cross reference.

Cross Reference Part Number:

About these Suspension Bushings

The VERKLINE pow-002-75 bushing cushions the joint between suspension parts and the car's body, absorbing vibration while controlling movement. As bushings crack or soften, handling becomes vague and the suspension starts to knock.

Frequently asked questions

What are the signs of worn bushings?

Clunking over bumps, wandering or vague steering, a shimmy under braking, uneven tire wear, and visible cracks, tears or separated rubber.

What is the difference between rubber and polyurethane bushings?

Rubber bushings, like factory parts, prioritise comfort and quietness. Polyurethane bushings are firmer, sharpening handling and lasting longer, but they can pass more noise and vibration into the cabin.

Can I replace bushings myself?

Many bushings must be pressed out of and into their arm or bracket, which needs a press or a dedicated bushing tool. Some are sold already fitted to a new arm, which is often simpler.

Is anything special needed during installation?

Tighten bushing bolts with the car at normal ride height so the bushing is not twisted at rest, and have an alignment done after replacing bushings that affect wheel position.

How do I make sure this suspension bushing fits my car?

Compare the part numbers listed on this page with the number on your old part or in your vehicle's parts catalog, and check the fitment information. If you are unsure, contact us with your VIN before ordering.

Euromotiv is an independent retailer of OEM, Genuine, and aftermarket automotive parts. We are not affiliated with, endorsed by, or authorized by Audi AG, Volkswagen AG, BMW AG, Mercedes-Benz Group AG, Dr. Ing. h.c. F. Porsche AG, MINI, or any other vehicle manufacturer. All trademarks, logos, and brand names are the property of their respective owners and are used solely for identification and compatibility purposes.