Skip to content

EBC 2014+ Audi S3 Bluestuff Rear Brake Pads

Availability:
5+ in stock, ready to be shipped
SKU EBCDP52173NDX
Save 5% Save 5%
Original price $112.85
Original price $112.85 - Original price $112.85
Original price $112.85
Current price $107.21
$107.21 - $107.21
Current price $107.21
CALIFORNIA WARNING

Handling passenger or off-highway motor vehicle parts can expose you to chemicals such as phthalates and lead, which can cause cancer and reproductive harm. To minimize exposure, service the vehicle in a well-ventilated area, wear gloves, and wash your hands. For more information see www.P65Warnings.ca.gov/motor-vehicle-parts.

Rewards
EARN REWARD POINTS
Purchasing this product will earn you 535 points to redeem on future purchases. Check your points.
Bluestuff NDX is a high friction sport and race material that can be used for aggressive street driving and certain types of track use. The material has had much success on the track with quality aftermarket calipers (Multi piston systems with better release and cooling and larger rotors) and limited success with street based calipers where pad size and caliper drag can challenge any brake material. The biggest advantage of EBC Bluestuff NDX is their bite from cold and progressive brake feel and the ability to bring a car to a complete stop. This has led to the ECE R90 brake safety regulation approval of R90 which is now completed and certificates are being obtained (during July 2011). There are certain older street based caliper systems where even the new Bluestuff will have trouble handling the caliper and slider drag inherent in the systems but this scenario is exactly the same for our competitors. There is NO material that will be PERFECT on the track in all older street based caliper systems.

This part also goes by the following cross reference.

Cross Reference Part Number:

About these Brake Pads

The EBC EBCDP52173NDX brake pads are the friction material that presses against the brake rotors to stop the car. Pad compound affects stopping power, pedal feel, noise and brake dust, and pads are always replaced as a set for both wheels on an axle.

Frequently asked questions

What are the signs that my brake pads are worn?

A brake-pad warning light, a squeal or grinding noise when braking, longer stopping distances, or less than about 3 mm of pad material visible through the wheel. Grinding usually means the backing plate is touching the rotor and needs immediate attention.

Do I need new rotors with new pads?

Check the rotors' thickness against the minimum stamped on them and look for grooves or vibration. Rotors that are worn, scored or below minimum thickness should be replaced with the pads so the new pads bed in on a fresh surface.

Do I need a new pad wear sensor?

On many European cars, yes. The sensor is designed to be worn through by the pad; once the warning has come on, or if the sensor was damaged during removal, it has to be replaced.

How do I break in new brake pads?

Follow the pad maker's bedding procedure, usually several moderate stops from speed without coming to a complete stop, then letting the brakes cool. Avoid hard stops for the first few hundred miles.

How do I make sure this brake pad set fits my car?

Compare the part numbers listed on this page with the number on your old part or in your vehicle's parts catalog, and check the fitment information. If you are unsure, contact us with your VIN before ordering.