Schrick 316° Intake Camshaft - BMW M10 Distibutor clockwise (000201160-03)

Schrick 316° camshaft for the BMW M10 4 Cyl., 2 Valve engine. Machined by AVL Schrick in Remscheid, Germany, this profile raises valve lift to 11.9 mm for greater cylinder filling and top-end power over the factory camshaft.Key Features & Benefits 316° duration — 278° measured at 1 mm lift 11.9 mm valve lift (9.1 mm cam lobe lift) 0.25 mm valve clearance — solid lash, mechanical adjustment Made by Schrick, OE supplier and motorsport camshaft specialist Important Fitment NotesLager 1&2 sind 2mm größer, NW-hohlgebohrt, ZV rechtslauf, rocker arm 00213063 empfohlen.Technical Specifications Brand BMW Engine M10 4 Cyl., 2 Valve Duration intake 316° Duration intake @ 1 mm 278° Duration exhaust 316° Duration exhaust @ 1 mm 278° Intake peak timing 100° Exhaust peak timing -100° Cam lobe lift intake 9.1 mm Cam lobe lift exhaust 9.13 mm Valve lift without valve clearance intake 11.9 mm Valve lift without valve clearance 11.9 mm Valve clearance intake 0.25 mm Valve clearance exhaust 0.3 mm Intake opens 58° Intake closes 78° Exhaust opens -258° Exhaust closes 58° Intake opens @ 1 mm (EM) 1 -43° Intake closes @ 1 mm (EM) 1 235° Exhaust opens @ 1 mm (AM) 1 -235° Exhaust closes @ 1 mm (AM) 1 43° Valve lift @ TDC intake (EM) 1 5.6 mm Valve lift @ TDC exhaust (AM) 1 5.52 mm Additional engine information : , Ignition distributor clockwise (9/80-) Installation NotesProfessional installation recommended. Camshaft timing must be set to the specification above; refer to the Schrick data sheet for the full timing diagram.Download the Schrick data sheet (PDF) — part 000201160-03.

This part also goes by the following cross reference.

Cross Reference Part Number: