Schrick 304° camshaft for the BMW M10 4 Cyl., 2 Valve engine. Machined by AVL Schrick in Remscheid, Germany, this profile raises valve lift to 10.7 mm for greater cylinder filling and top-end power over the factory camshaft.
Key Features & Benefits
- 304° duration — 262° measured at 1 mm lift
- 10.7 mm valve lift (8.21 mm cam lobe lift)
- 0.2 mm valve clearance — solid lash, mechanical adjustment
- Made by Schrick, OE supplier and motorsport camshaft specialist
Important Fitment Notes
Zündvert, rechtsl, (-9/80), in mittlerer Lagerbohrung Nut einfräsen.
Technical Specifications
| Brand | BMW |
| Engine | M10 4 Cyl., 2 Valve |
| Duration intake | 304° |
| Duration intake @ 1 mm | 262° |
| Duration exhaust | 304° |
| Duration exhaust @ 1 mm | 262° |
| Intake peak timing | 108° |
| Exhaust peak timing | -108° |
| Cam lobe lift intake | 8.21 mm |
| Cam lobe lift exhaust | 8.21 mm |
| Valve lift without valve clearance intake | 10.7 mm |
| Valve lift without valve clearance | 10.7 mm |
| Valve clearance intake | 0.2 mm |
| Valve clearance exhaust | 0.3 mm |
| Intake opens | -44° |
| Intake closes | 260° |
| Exhaust opens | -260° |
| Exhaust closes | 44° |
| Intake opens @ 1 mm (EM) 1 | -19° |
| Intake closes @ 1 mm (EM) 1 | 243° |
| Exhaust opens @ 1 mm (AM) 1 | -243° |
| Exhaust closes @ 1 mm (AM) 1 | 19° |
| Valve lift @ TDC intake (EM) 1 | 2.72 mm |
| Valve lift @ TDC exhaust (AM) 1 | 2.72 mm |
| Additional engine information : | , Ignition distributor clockwise (9/80-) |
Installation Notes
Professional installation recommended. Camshaft timing must be set to the specification above; refer to the Schrick data sheet for the full timing diagram.
Download the Schrick data sheet (PDF) — part 000201040-01.
This part also goes by the following cross reference.
Cross Reference Part Number: