Schrick 264° camshaft for the VW VR6, 6 cyl., 2 valve engine. Machined by AVL Schrick in Remscheid, Germany, this profile raises valve lift to 11.4 mm for greater cylinder filling and top-end power over the factory camshaft.
Key Features & Benefits
- 264° duration — 229° measured at 1 mm lift
- 11.4 mm valve lift (11.4 mm cam lobe lift)
- Hydraulic lash
- Made by Schrick, OE supplier and motorsport camshaft specialist
Important Fitment Notes
Bei Verwendung von Schrick-Federn müssen diese 1,00mm unterlegt werden with Scheiben 089500811/814.
Technical Specifications
| Engine | VR6, 6 cyl., 2 valve |
| Duration intake | 264° |
| Duration intake @ 1 mm | 229° |
| Duration exhaust | 260° |
| Duration exhaust @ 1 mm | 225° |
| Intake peak timing | 115° |
| Exhaust peak timing | 115° |
| Cam lobe lift intake | 11.4 mm |
| Cam lobe lift exhaust | 11.2 mm |
| Valve lift without valve clearance intake | 11.4 mm |
| Valve lift without valve clearance | 11.2 mm |
| Valve clearance intake | hydraulic |
| Valve clearance exhaust | hydraulic |
| Intake opens | 17° |
| Intake closes | 67° |
| Exhaust opens | 65° |
| Exhaust closes | 15° |
| Intake opens @ 1 mm (EM) 1 | 0° |
| Intake closes @ 1 mm (EM) 1 | 229° |
| Exhaust opens @ 1 mm (AM) 1 | -228° |
| Exhaust closes @ 1 mm (AM) 1 | -3° |
| Valve lift @ TDC intake (EM) 1 | 0.91 mm |
| Valve lift @ TDC exhaust (AM) 1 | 0.75 mm |
Installation Notes
Professional installation recommended. Camshaft timing must be set to the specification above; refer to the Schrick data sheet for the full timing diagram.
Download the Schrick data sheet (PDF) — part 0268R1641-01.
This part also goes by the following cross reference.
Cross Reference Part Number: