Passer au contenu

Powerflex Manual Steering Rack Bushing - Mk2 | Mk3 | Golf | Jetta

Disponibilité:
5 + en stock, prêt à être expédié

Ships same or next business day

UGC PFF85-231
Prix d'origine $72.99 - Prix d'origine $72.99
Prix d'origine
$72.99
$72.99 - $72.99
Prix actuel $72.99
CALIFORNIA WARNING

Handling passenger or off-highway motor vehicle parts can expose you to chemicals such as phthalates and lead, which can cause cancer and reproductive harm. To minimize exposure, service the vehicle in a well-ventilated area, wear gloves, and wash your hands. For more information see www.P65Warnings.ca.gov/motor-vehicle-parts.

Rewards
EARN REWARD POINTS
Purchasing this product will earn you 360 points to redeem on future purchases. Check your points.


Note: For manual steering rack vehicles.

Powerflex polyurethane bushings are designed to decrease the amount of deflection in your car's suspension which improves handling, driver feedback, and tire wear. Powerflex uses their own premium polyurethane formulation to provide minimal NVH (noise, vibration, harshness) and increased longevity over stock rubber bushings.

Bushings are produced in one of three durometers – Yellow (70A, approximately 25% stiffer than stock), Purple (80A, approximately 30% stiffer than stock), and Black (95A, approximately 80% stiffer than stock). Unlike other brands using only one urethane grade for all applications, Powerflex design engineers choose the correct hardness to allow for the specific movement or rigidity required for each location while minimizing unwanted NVH.

Powerflex urethane hardness is standardized per fitment and location. This takes out the guess work, so when you choose Street, you know our design engineers have selected the optimal polyurethane hardness for your specific application. Select parts are also available in an optional stiffer urethane (Black Series) for track and autocross performance where NVH is less important.


This part also goes by the following cross reference.

Cross Reference Part Number: 191 419 883

About these Suspension Bushings

The POWERFLEX PFF85-231 bushing cushions the joint between suspension parts and the car's body, absorbing vibration while controlling movement. As bushings crack or soften, handling becomes vague and the suspension starts to knock.

Frequently asked questions

What are the signs of worn bushings?

Clunking over bumps, wandering or vague steering, a shimmy under braking, uneven tire wear, and visible cracks, tears or separated rubber.

What is the difference between rubber and polyurethane bushings?

Rubber bushings, like factory parts, prioritise comfort and quietness. Polyurethane bushings are firmer, sharpening handling and lasting longer, but they can pass more noise and vibration into the cabin.

Can I replace bushings myself?

Many bushings must be pressed out of and into their arm or bracket, which needs a press or a dedicated bushing tool. Some are sold already fitted to a new arm, which is often simpler.

Is anything special needed during installation?

Tighten bushing bolts with the car at normal ride height so the bushing is not twisted at rest, and have an alignment done after replacing bushings that affect wheel position.

How do I make sure this suspension bushing fits my car?

Compare the part numbers listed on this page with the number on your old part or in your vehicle's parts catalog, and check the fitment information. If you are unsure, contact us with your VIN before ordering.