Passer au contenu

HPA Motorsports Full Throttle eXtreme FTX600 VR6 Turbo Kit 600HP - VW R32 | Audi TT | A3 3.2L VR6

Ships from Supplier
Ships from Supplier
Ships from Supplier
Ships from Supplier
Ships from Supplier

Ships in 5–7 business days

UGC FTX600-MK4
Prix d'origine $18,899.00 - Prix d'origine $19,449.00
Prix d'origine
$18,899.00
$18,899.00 - $19,449.00
Prix actuel $18,899.00
CALIFORNIA WARNING

Handling passenger or off-highway motor vehicle parts can expose you to chemicals such as phthalates and lead, which can cause cancer and reproductive harm. To minimize exposure, service the vehicle in a well-ventilated area, wear gloves, and wash your hands. For more information see www.P65Warnings.ca.gov/motor-vehicle-parts.

Vehicle: VW Mk4 Golf R32
Rewards
EARN REWARD POINTS
Purchasing this product will earn you 94495 points to redeem on future purchases. Check your points.

Our HPA Full Throttle eXtreme Single Turbo kits features the Borg Warner EFR 8374 turbo which delivers instant throttle response and supports multiple boost settings. Under 20 psi this system delivers 500+ ft-lbs torque and 500+ hp, and by massaging the block and upgrading a variety of support parts, the HPA team has achieved proven power figures in the 600 range for exhilerating acceleration. Read about the FTX-600 equipped Mk4 R32 that took top honors in the 2015 European Car Tuner Grand Prix


All FTX Kits Include: 

  • Borg Warner EFR 8374 Single Scroll Turbocharger
    Inconel Turbo Studs with Rolled Threads
  • CNC Machined Billet Aluminum Turbo Inlet Adapter
  • HPA proprietary cast exhaust manifold with external O2 sensor bungs and Incontel turbo studs with rolled threads
  • Stainless Steel Downpipes with Interlock Flex Joint
  • Hand Fabricated Stainless Steel heatshields, heat wrap, and turbo blanket
  • Compression Reduction kit
  • Liquid Cooled Short Runner Intake Manifold with Aftercooler Package for AWIC
  • 750ml Fuel Injectors
  • Parallel Fuel System with Auxiliary Fuel Pump
  • 3.8 bar Fuel Pressure Regulator
  • Larger MAF
  • Custom Wrapped Silicone Boost Plumbing
  • Stainless Steel Oil and Water Lines
  • Vacuum Lines and Emission Control Integration
  • Software
  • E-boost 2 Electronic Boost Controller

FTX 600 Kit Specific Requires:

For 600HP @ 25.5PSI

  • Race Grade Connecting Rod Bearings
  • High Flow Cat Section 
  • HPA 88mm Exhaust System
  • HPA CVP Camshafts (Core Exchange)
  • Ferrea FTX 3.2L VR6 Valvetrain Upgrade Kit
  • Ferrea FTX 3.2L VR6 Valve Set Kit
  • Carrillo Connecting Rod Set
  • Mahle Power Pak Piston Set

DSG:

  • DQ500 Conversion w/HPA DSG Clutches

MT:

  • MQ500 Conversion
  • Clutch Masters FX-850 Clutch Kit

 

This part also goes by the following cross reference.

Cross Reference Part Number:

About this Turbocharger

The HPA MOTORSPORTS FTX600-MK4 turbocharger uses exhaust energy to spin a turbine that drives a compressor, forcing more air into the engine. More air means more power from a smaller engine, and turbocharger health depends heavily on clean oil.

Frequently asked questions

What are the signs of a failing turbocharger?

Loss of boost and power, a loud whine or siren sound, blue or grey smoke, oil in the intake pipes or intercooler, or boost-related fault codes.

What causes a turbocharger to fail?

Most failures come from oil problems, such as dirty oil, a blocked oil feed or late oil changes, and from foreign objects entering the turbine or compressor. Find and fix the cause before fitting the new turbo.

What should I replace along with the turbo?

Replace the oil feed and return lines or their seals, all gaskets and single-use fasteners, and change the oil and filter. Clean or replace the intercooler and pipes if the old turbo shed oil or debris into them.

Can I install a turbocharger myself?

It is an involved job with tight access and important oil-priming steps. Prime the turbo with oil before first start and let the engine idle to build oil pressure. An experienced technician is recommended.

How do I make sure this turbocharger fits my car?

Compare the part numbers listed on this page with the number on your old part or in your vehicle's parts catalog, and check the fitment information. If you are unsure, contact us with your VIN before ordering.