Passer au contenu
GKN LOEBRO Axle Shaft Assembly - 301623

GKN LOEBRO Axle Shaft Assembly 301623

GKN LOEBRO
Disponibilité:
5 + en stock, prêt à être expédié

Ships same or next business day

UGC 301623
$350.28 - $350.28
$350.28
$350.28 - $350.28
$350.28
CALIFORNIA WARNING

Handling passenger or off-highway motor vehicle parts can expose you to chemicals such as phthalates and lead, which can cause cancer and reproductive harm. To minimize exposure, service the vehicle in a well-ventilated area, wear gloves, and wash your hands. For more information see www.P65Warnings.ca.gov/motor-vehicle-parts.

Rewards
EARN REWARD POINTS
Purchasing this product will earn you 1750 points to redeem on future purchases. Check your points.

GKN LOEBRO

Axle Shaft Assembly

This product also goes by these part numbers: 251 407 271 JX, 251407271JX, 301623

This brand is rebuilt.

This part also goes by the following cross reference.

Cross Reference Part Number: 251407271JX

Fits These Vehicles 13 applications
Transporter
Make Model Engine Years
VW TRANSPORTER T3 Bus (25_) 1.9 Syncro 1985–1992
VW TRANSPORTER T3 Bus (25_) 2.1 Syncro 1985–1992
VW TRANSPORTER T3 Bus (25_) 1.6 TD Syncro 1986–1992
VW TRANSPORTER T3 Bus (25_) 2.1 Syncro 1986–1992
VW TRANSPORTER T3 Bus (25_) 2.1 Syncro 1986–1992
VW TRANSPORTER T3 Platform/Chassis (24_) 1.9 Syncro 1984–1992
VW TRANSPORTER T3 Platform/Chassis (24_) 2.1 Syncro 1985–1992
VW TRANSPORTER T3 Platform/Chassis (24_) 2.1 Syncro 1986–1992
VW TRANSPORTER T3 Platform/Chassis (24_) 1.6 TD Syncro 1986–1992
VW TRANSPORTER T3 Van (24_, 25_) 1.9 Syncro 1984–1992
VW TRANSPORTER T3 Van (24_, 25_) 2.1 Syncro 1985–1992
VW TRANSPORTER T3 Van (24_, 25_) 2.1 Syncro 1986–1992
VW TRANSPORTER T3 Van (24_, 25_) 1.6 TD Syncro 1986–1992

Fitment data last updated: 2026-04-27

Fits 13 vehicle applications Check vehicle fitment before ordering View fitment

About this Axle & CV Shaft

The GKN LOEBRO 301623 axle shaft delivers power from the transmission or differential to the wheel. Constant-velocity (CV) joints at each end let it keep turning smoothly while the suspension moves and the wheels steer.

Frequently asked questions

What does an axle or CV shaft do?

It transmits torque to the wheel while its CV joints allow the angle and length to change as the suspension travels and, on front axles, as the wheels turn.

What are the signs of a failing axle shaft?

A clicking noise when turning, especially under acceleration, a vibration that increases with speed, a clunk when taking off, or grease thrown around the inside of the wheel from a torn CV boot.

Can I just replace the CV boot instead?

If a torn boot is caught early, before dirt and water have damaged the joint, a boot kit can be enough. Once the joint clicks or has lost its grease, replacing the complete axle is usually the better repair.

What should I replace along with the axle?

Use a new axle nut or bolt if the manufacturer specifies a single-use fastener, and a new seal at the transmission if it leaks. Tighten the axle nut to the specified torque with the car on the ground.

How do I make sure this axle shaft fits my car?

Compare the part numbers listed on this page with the number on your old part or in your vehicle's parts catalog, and check the fitment information. If you are unsure, contact us with your VIN before ordering.

Euromotiv is an independent retailer of OEM, Genuine, and aftermarket automotive parts. We are not affiliated with, endorsed by, or authorized by Audi AG, Volkswagen AG, BMW AG, Mercedes-Benz Group AG, Dr. Ing. h.c. F. Porsche AG, MINI, or any other vehicle manufacturer. All trademarks, logos, and brand names are the property of their respective owners and are used solely for identification and compatibility purposes.