Passer au contenu

EBC 12+ Volkswagen CC 3.6 Greenstuff Front Brake Pads

Disponibilité:
5 + en stock, prêt à être expédié
UGC EBCDP22127
Économisez 5% Économisez 5%
Prix d'origine $163.13
Prix d'origine $163.13 - Prix d'origine $163.13
Prix d'origine $163.13
Prix actuel $154.97
$154.97 - $154.97
Prix actuel $154.97
CALIFORNIA WARNING

Handling passenger or off-highway motor vehicle parts can expose you to chemicals such as phthalates and lead, which can cause cancer and reproductive harm. To minimize exposure, service the vehicle in a well-ventilated area, wear gloves, and wash your hands. For more information see www.P65Warnings.ca.gov/motor-vehicle-parts.

Rewards
EARN REWARD POINTS
Purchasing this product will earn you 770 points to redeem on future purchases. Check your points.
Designed for premium street driving offering better brake effect up to 600-degrees C (1100-degrees F). EBC Greenstuff has a high initial brake effect and gives drivers confidence from first application of the brake pedal. There is no such thing as a NO DUST pad. The very nature of how a brake works requires that some dust be generated to avoid rotor vibration (shimmying). The EBC pad creates less dust and dust is more easily washed off than most. All pads create more dust as they are bedding in especially if rotors are worn. Nominal friction coefficient 0.55. For heavier faster cars and vehicles above 200bhp we strongly recommend Redstuff which DOES offer much less dust.

This part also goes by the following cross reference.

Cross Reference Part Number:

About these Brake Pads

The EBC EBCDP22127 brake pads are the friction material that presses against the brake rotors to stop the car. Pad compound affects stopping power, pedal feel, noise and brake dust, and pads are always replaced as a set for both wheels on an axle.

Frequently asked questions

What are the signs that my brake pads are worn?

A brake-pad warning light, a squeal or grinding noise when braking, longer stopping distances, or less than about 3 mm of pad material visible through the wheel. Grinding usually means the backing plate is touching the rotor and needs immediate attention.

Do I need new rotors with new pads?

Check the rotors' thickness against the minimum stamped on them and look for grooves or vibration. Rotors that are worn, scored or below minimum thickness should be replaced with the pads so the new pads bed in on a fresh surface.

Do I need a new pad wear sensor?

On many European cars, yes. The sensor is designed to be worn through by the pad; once the warning has come on, or if the sensor was damaged during removal, it has to be replaced.

How do I break in new brake pads?

Follow the pad maker's bedding procedure, usually several moderate stops from speed without coming to a complete stop, then letting the brakes cool. Avoid hard stops for the first few hundred miles.

How do I make sure this brake pad set fits my car?

Compare the part numbers listed on this page with the number on your old part or in your vehicle's parts catalog, and check the fitment information. If you are unsure, contact us with your VIN before ordering.