Passer au contenu

Audi Oxygen Sensor – Downstream 07P906265K – Denso 2344995

Disponibilité:
Rupture de stock
UGC 234-4995
Épuisé
Prix d'origine $181.95 - Prix d'origine $181.95
Prix d'origine
$181.95
$181.95 - $181.95
Prix actuel $181.95
CALIFORNIA WARNING

Handling passenger or off-highway motor vehicle parts can expose you to chemicals such as phthalates and lead, which can cause cancer and reproductive harm. To minimize exposure, service the vehicle in a well-ventilated area, wear gloves, and wash your hands. For more information see www.P65Warnings.ca.gov/motor-vehicle-parts.

Rewards
EARN REWARD POINTS
Purchasing this product will earn you 905 points to redeem on future purchases. Check your points.

This downstream oxygen sensor for Audi vehicles measures exhaust oxygen to fine-tune fuel delivery, enhancing performance and lowering emissions. It fits Audi R8 (2018, 2020) with 5.2 V10 and Audi A8 Quattro (2015-2016) with 6.3 W12 engines. Manufactured by Denso, it is a direct OE replacement with a typical lifespan of 100,000 miles.

Key Features & Benefits

  • Sensor Type: Heated – quick light-off and accurate readings
  • Thread Diameter: 0.708 inches – standard fitment
  • Mounting Type: Threaded – straightforward installation
  • Connector Gender: Male – plug-and-play
  • Direct Replacement for OE Part 07P906265K – factory spec
  • Designed for High-Performance Engines: Handles extreme exhaust conditions

Vehicle Fitment

Make Model Years Engine
Audi R8 2018 5.2V10
Audi R8 2020 5.2V10
Audi A8 Quattro 2015–2016 6.3W12

Technical Specifications

Part Number 07P906265K
OEM Cross Reference Denso 2344995
Sensor Type Heated
Thread Diameter 0.708 inches
Connector Gender Male
Mounting Type Threaded

Installation Notes

Simple threaded installation using standard oxygen sensor tools.

About DENSO

DENSO is a Tier 1 supplier to many luxury automakers, providing factory-level quality and durability.

This part also goes by the following cross reference.

Cross Reference Part Number:

Fits These Vehicles 3 applications
4S R8
Make Model Engine Years
Audi R8 5.2V10 2018–2018
Audi R8 5.2V10 2020–2020
D4 A8
Make Model Engine Years
Audi A8 Quattro 6.3W12 2015–2016
Fits 3 vehicle applications Check vehicle fitment before ordering View fitment

About this Oxygen Sensor

The DENSO 234-4995 oxygen sensor measures the oxygen in the exhaust so the engine computer can keep the fuel mixture correct. Sensors before the catalytic converter control the mixture; sensors after it monitor the converter's efficiency.

Frequently asked questions

What does an oxygen sensor do?

It reports how rich or lean the exhaust is, and the engine computer adjusts fuel delivery in response. A faulty sensor can make the engine run too rich or too lean.

What are the signs of a failing oxygen sensor?

A check-engine light with oxygen-sensor or fuel-trim codes, poorer fuel economy, rough idle, or a failed emissions test. Exhaust leaks near the sensor can cause similar codes, so check for those too.

How do I know which sensor I need?

Sensors are specific to their position: upstream (before the catalytic converter) or downstream (after it), and on V engines, bank 1 or bank 2. The fault code usually identifies the position; check the product details for the position this sensor fits.

Can I replace an oxygen sensor myself?

Usually, yes, using an oxygen-sensor socket. Many new sensors come with anti-seize already on the threads; if not, use a sensor-safe compound only on the threads, and keep it off the sensor tip.

How do I make sure this oxygen sensor fits my car?

Compare the part numbers listed on this page with the number on your old part or in your vehicle's parts catalog, and check the fitment information. If you are unsure, contact us with your VIN before ordering.