Passer au contenu

Bilstein B16 (PSS10) Front & Rear Performance Suspension System 15+ Audi A3 / VW Golf ALL

Disponibilité:
5 + en stock, prêt à être expédié

Ships same or next business day

UGC BIL48-251570
Économisez 31% Économisez 31%
Prix d'origine $2,888.00
Prix d'origine $2,888.00 - Prix d'origine $2,888.00
Prix d'origine $2,888.00
Prix actuel $1,999.00
$1,999.00 - $1,999.00
Prix actuel $1,999.00
CALIFORNIA WARNING

Handling passenger or off-highway motor vehicle parts can expose you to chemicals such as phthalates and lead, which can cause cancer and reproductive harm. To minimize exposure, service the vehicle in a well-ventilated area, wear gloves, and wash your hands. For more information see www.P65Warnings.ca.gov/motor-vehicle-parts.

Rewards
EARN REWARD POINTS
Purchasing this product will earn you 9995 points to redeem on future purchases. Check your points.
Bilstein B16 (PSS10) suspension kits feature ride height adjustability with 10-stage manually adjustable dampers in an OE quality, direct fit package. The 10-stage damping system adjusts both rebound and compression with each click to provide the best handling performance in any condition. These kits offer monotube performance dampers with matched springs that are tuned for each specific application. The zinc coated and threaded body design will give you the flexibility to find the perfect ride height setting for your intended use while providing unsurpassed protection against the harshest road elements. B16 (PSS10) suspension kits are made in Germany and feature technology tested on the famed Nürburgring.

This part also goes by the following cross reference.

Cross Reference Part Number:

About these Shocks & Struts

The BILSTEIN BIL48-251570 shock absorber or strut controls how the springs compress and rebound, keeping the tires in contact with the road. Worn dampers make a car bounce, dive under braking and lose grip, even when the springs are fine.

Frequently asked questions

What are the signs of worn shocks or struts?

Continued bouncing after a bump, nose dive under braking, body roll in corners, oil leaking from the body of the shock, clunks over bumps, or uneven, cupped tire wear.

Should shocks and struts be replaced in pairs?

Yes, always replace them in pairs on the same axle so both sides damp the same way. Replacing only one side can make the car unstable.

What should I replace along with them?

Inspect and usually replace the top mounts, bump stops and dust boots at the same time; worn mounts cause noise and new dampers can be damaged by torn boots. Check the springs for cracks or sagging.

Can I install struts myself?

A strut combines the damper and spring, so disassembly requires compressing the spring with a proper spring compressor. That is dangerous without the right tools. After fitting struts, have an alignment done.

How do I make sure this shock absorber fits my car?

Compare the part numbers listed on this page with the number on your old part or in your vehicle's parts catalog, and check the fitment information. If you are unsure, contact us with your VIN before ordering.