Passer au contenu
AEM 400 LPH E85 Compatible Fuel Pump Kit - Single Barb

AEM 400 LPH E85 Compatible Fuel Pump Kit - Single Barb

AEM
Disponibilité:
5 + en stock, prêt à être expédié

Ships same or next business day

UGC AEM50-1235
Économisez 20% Économisez 20%
$194.95
$194.95 - $194.95
$194.95
$155.66
$155.66 - $155.66
$155.66
CALIFORNIA WARNING

Handling passenger or off-highway motor vehicle parts can expose you to chemicals such as phthalates and lead, which can cause cancer and reproductive harm. To minimize exposure, service the vehicle in a well-ventilated area, wear gloves, and wash your hands. For more information see www.P65Warnings.ca.gov/motor-vehicle-parts.

Not CARB legal – cannot ship to CA

Rewards
EARN REWARD POINTS
Purchasing this product will earn you 775 points to redeem on future purchases. Check your points.
AEM's 400LPH high flow fuel pumps were designed with high performance naturally aspirated and forced induction EFI vehicles in mind! They deliver the same high flow and reliable performance that AEM has become known for at very competitive price. Each pump is individually flow tested and guaranteed to flow 400+ LPH (106 GPH) at 40 PSI (13.5V), which on gasoline will support 1000+ horsepower!* The pumps also maintain their high flowrate even as system pressure increases flowing 330+ LPH at 70 PSI (13.5V) which will support approx. 870 HP* on gasoline! Please see the flow curves and current draw vs. fuel pressure graphs on the specs tab for more information. With their compact 39mm body (same size as Walbro 255), low amperage draw, 11mm inlets and 9mm barbed outlet's these fuel pumps were designed to replace the OEM fuel pump in many applications. The 50-1230 features a double barbed outlet that is ideal for 3/8-inch ID hose where the 50-1235 features a smooth barbed outlet that is compatible with 5/16-inch ID hose. Each pump includes a wiring harness, pre filter, internal fuel hose and clamps, end cap and rubber buffer sleeve.

This part also goes by the following cross reference.

Cross Reference Part Number:

About this Fuel Pump

The AEM AEM50-1235 fuel pump moves fuel from the tank to the engine at the pressure the fuel-injection system needs. Most modern European cars use an electric pump mounted inside the fuel tank, often as part of a module with the fuel-level sender and a strainer.

Frequently asked questions

What does a fuel pump do?

It draws fuel from the tank and delivers it to the engine at the pressure the injection system requires. If pressure drops, the engine can run lean, lose power or fail to start.

What are the signs of a failing fuel pump?

Long cranking before the engine starts, hesitation or loss of power under load, stalling, a whining or buzzing noise from the tank, or a no-start. A clogged filter, a failed relay or a wiring fault can cause the same symptoms, so check fuel pressure before replacing the pump.

Can I replace a fuel pump myself?

On many cars the pump is reached through an access panel under the rear seat or trunk floor; on others the tank has to be lowered. Relieve the fuel system pressure, disconnect the battery, work in a well-ventilated area away from sparks and flames, and fit a new seal or O-ring at the pump flange. If you are unsure, have a professional install it.

What should I replace along with the fuel pump?

Replace the tank seal or O-ring and, if your car has a separate one, the fuel filter. Inspect the strainer and the electrical connector. If the old pump failed because of dirt or debris, clean the tank before fitting the new pump.

How do I make sure this pump fits my car?

Compare the part numbers listed on this page with the number on your old pump or in your vehicle's parts catalog, and check the fitment information. If you are unsure, contact us with your VIN before ordering.

Euromotiv is an independent retailer of OEM, Genuine, and aftermarket automotive parts. We are not affiliated with, endorsed by, or authorized by Audi AG, Volkswagen AG, BMW AG, Mercedes-Benz Group AG, Dr. Ing. h.c. F. Porsche AG, MINI, or any other vehicle manufacturer. All trademarks, logos, and brand names are the property of their respective owners and are used solely for identification and compatibility purposes.