Passer au contenu

Porsche Strut Mount – Front Upper 91134101800

Disponibilité:
Rupture de stock
UGC 91134101800
Épuisé
Prix d'origine $145.47 - Prix d'origine $145.47
Prix d'origine
$145.47
$145.47 - $145.47
Prix actuel $145.47
CALIFORNIA WARNING

Handling passenger or off-highway motor vehicle parts can expose you to chemicals such as phthalates and lead, which can cause cancer and reproductive harm. To minimize exposure, service the vehicle in a well-ventilated area, wear gloves, and wash your hands. For more information see www.P65Warnings.ca.gov/motor-vehicle-parts.

Rewards
EARN REWARD POINTS
Purchasing this product will earn you 725 points to redeem on future purchases. Check your points.

The suspension strut mount is the component that attaches the strut assembly to the vehicle on the top side. They often contain a bearing or bearing plate that serves as a steering pivot when the strut assembly turns with the motion of the steering. One side of the strut mount bolts to the vehicle, while the other side is connected to the strut. The strut mount insulates the tire noise and road vibrations from the vehicle. You should replace your strut mounts when you replace your strut and spring assembly, or if you notice squeaking or clunking noises from the front suspension when going over bumps or turning the steering wheel. euromotiv is your source for genuine and aftermarket suspension strut mounts should you need to purchase a replacement.

Brand Part #
Brand Part #
Porsche 911 341 018 00 / 91134101800
  • Replaces: 914-341-018-00
  • Position: Upper
  • Part can be found as reference #6 in illustration.
  • Fitment Notes: 911. 1984-89.

This part also goes by the following cross reference.

Cross Reference Part Number: 91434101800, 914-341-018-00

Fits These Vehicles 20 applications
Porsche
Make Model Engine Years
Porsche 911Base 2.7H6 1974–1974
Porsche 911T 2.2H6 1970–1971
Porsche 911T 2.3H6 1972–1973
Porsche 911E 2.2H6 1970–1971
Porsche 911E 2.3H6 1972–1973
Porsche 911S 2.2H6 1970–1971
Porsche 911S 2.3H6 1972–1973
Porsche 911S 2.7H6 1974–1977
Porsche 911Carrera 2.7H6 1974–1975
Porsche 911Carrera 3.2H6 1984–1989
Porsche 911SC 3.0H6 1978–1983
Porsche 911Speedster 3.2H6 1989–1989
Porsche 911Turbo 3.0H6 1976–1977
Porsche 911Turbo 3.3H6 1978–1979
Porsche 911Turbo 3.3H6 1981–1989
Porsche 912E 2.0H4 1976–1976
Porsche 914Base 1.7H4 1970–1973
Porsche 914Base 1.8H4 1974–1975
Porsche 914Base 2.0H4 1973–1976
Porsche 914914-6 2.0H6 1970–1972
Fits 20 vehicle applications Check vehicle fitment before ordering View fitment

About this Strut & Shock Mount

The GENUINE PORSCHE 91134101800 mount attaches the top of the strut or shock absorber to the car's body, cushioning suspension movement. Front strut mounts often include a bearing that lets the strut turn with the steering.

Frequently asked questions

What does a strut or shock mount do?

It connects the damper to the body while isolating noise and vibration. On front struts, the mount bearing allows the strut and spring to rotate as you steer.

What are the signs of a worn strut mount?

A clunk or knock over bumps, a creak or binding feeling when turning the steering, vague handling, or visible cracks and separation in the rubber.

Should I replace the mounts with the struts?

It is recommended. The strut has to be disassembled to replace the mount anyway, and fitting new mounts with new struts avoids repeating the labor and alignment later.

Can I replace strut mounts myself?

Replacing a strut mount means compressing the coil spring, which requires a proper spring compressor and can cause serious injury if done incorrectly. Have an alignment done afterwards.

How do I make sure this strut or shock mount fits my car?

Compare the part numbers listed on this page with the number on your old part or in your vehicle's parts catalog, and check the fitment information. If you are unsure, contact us with your VIN before ordering.