Passer au contenu

Porsche Tie Rod – Front Inner 99634732203

Disponibilité:
Rupture de stock
UGC 99634732203
Épuisé
Prix d'origine $116.46 - Prix d'origine $116.46
Prix d'origine
$116.46
$116.46 - $116.46
Prix actuel $116.46
CALIFORNIA WARNING

Handling passenger or off-highway motor vehicle parts can expose you to chemicals such as phthalates and lead, which can cause cancer and reproductive harm. To minimize exposure, service the vehicle in a well-ventilated area, wear gloves, and wash your hands. For more information see www.P65Warnings.ca.gov/motor-vehicle-parts.

Rewards
EARN REWARD POINTS
Purchasing this product will earn you 580 points to redeem on future purchases. Check your points.

A steering tie rod or track rod connects a vehicles steering rack to the steering arm. They act as a pivot point between the steering system and the hub/wheel assembly. Whether your vehicle uses a steering box and pitman arm or a rack and pinion system, it is the steering tie rod that transfers the steering input to the wheels. The outer end of the tie rod is usually adjustable, allowing the length of the rod to be changed and vehicle alignment to be corrected. Because the ratio of a tie rod’s length to width is very large, the tie rod is susceptible to bending under larger than intended compressive forces. It is wise to inspect tie rods after a minor collision or road hazard impact and replace if the part shows any sign of deformation.

  • Replaces: 993-347-322-03, 996-347-322-04
  • Position: Left, Right
  • Part can be found as reference #5 in illustration.
  • Fitment Notes: Boxster. 911, 911 Turbo.

This part also goes by the following cross reference.

Cross Reference Part Number: 99334732203, 993-347-322-03, 99634732204, 996-347-322-04

Fits These Vehicles 13 applications
Porsche
Make Model Engine Years
Porsche BoxsterBase 2.5H6 1997–1999
Porsche BoxsterBase 2.7H6 2000–2004
Porsche BoxsterS 3.2H6 2000–2004
Porsche 911Carrera 3.4H6 1999–2001
Porsche 911Carrera 3.6H6 2002–2005
Porsche 911Carrera 4 3.6H6 1999–2005
Porsche 911Carrera 4S 3.6H6 2002–2005
Porsche 911Targa 3.6H6 2002–2005
Porsche 911GT3 3.6H6 2004–2005
Porsche 911Turbo 3.6H6 2001–2005
Porsche 911Turbo S 3.6H6 2005–2005
Porsche 911GT2 3.6H6 2002–2005
Porsche 91140th Anniversary Edition 3.6H6 2005–2005
Fits 13 vehicle applications Check vehicle fitment before ordering View fitment

About this Tie Rod

The GENUINE PORSCHE 99634732203 tie rod connects the steering rack to the steering knuckle, turning the wheels when you turn the steering wheel. Worn tie rods cause loose steering and uneven tire wear and must be replaced promptly.

Frequently asked questions

What does a tie rod do?

It transmits steering movement from the rack to each front wheel and sets the wheel's toe angle. Inner and outer tie rods each have a joint that allows the suspension to move while you steer.

What are the signs of a worn tie rod?

Loose or vague steering, a clunk when turning, the car pulling or wandering, uneven wear on the inner or outer edge of the tires, or a torn rubber boot on the joint.

Do I need an alignment after replacing a tie rod?

Yes. Tie rods set toe, and even careful measuring cannot replace a proper alignment afterwards. Driving without one can wear tires quickly.

Should I replace inner and outer tie rods together?

Replace whichever joint is worn. If both are original and high-mileage, replacing them together, and doing both sides, avoids paying for a second alignment soon after.

How do I make sure this tie rod fits my car?

Compare the part numbers listed on this page with the number on your old part or in your vehicle's parts catalog, and check the fitment information. If you are unsure, contact us with your VIN before ordering.