Passer au contenu

EBC 06-13 Audi A3 2.0 Turbo (Girling rear caliper) Yellowstuff Front Brake Pads

Disponibilité:
5 + en stock, prêt à être expédié
UGC EBCDP41517R
Économisez 5% Économisez 5%
Prix d'origine $158.45
Prix d'origine $158.45 - Prix d'origine $158.45
Prix d'origine $158.45
Prix actuel $150.53
$150.53 - $150.53
Prix actuel $150.53
CALIFORNIA WARNING

Handling passenger or off-highway motor vehicle parts can expose you to chemicals such as phthalates and lead, which can cause cancer and reproductive harm. To minimize exposure, service the vehicle in a well-ventilated area, wear gloves, and wash your hands. For more information see www.P65Warnings.ca.gov/motor-vehicle-parts.

Rewards
EARN REWARD POINTS
Purchasing this product will earn you 750 points to redeem on future purchases. Check your points.
EBC Yellowstuff is an aramid fibre based brake compound with high brake effect form cold and is possibly one of the first ever compounds that can be used for STREET AND TRACK DRIVING. These pads do not require warm up but do get even stronger under the heat of hard driving. These are not a low dust pad and if your desire is for a low dust premium street use pad, you should consider EBC Redstuff.When considering full race use, Yellowstuff has been a strong favourite, having been used for two years in the Swedish Camaro Cup and at numerous other race events where a stock caliper system is fitted.It is also the choice of 90-percent of the Mazda MX5 Miata competitors in the UK race series and has an unblemished record as rotor friendly track pad for vehicles up to 2000 lbs weight or 200 BHP.In the USA the SCCA and NASA drivershave been testing Yellowstuff with feedback and good reports POURING in from a 543 test driver major market proving event with these groups. Read that figure again 543 test drivers.There is no guesswork here.

This part also goes by the following cross reference.

Cross Reference Part Number:

About these Brake Pads

The EBC EBCDP41517R brake pads are the friction material that presses against the brake rotors to stop the car. Pad compound affects stopping power, pedal feel, noise and brake dust, and pads are always replaced as a set for both wheels on an axle.

Frequently asked questions

What are the signs that my brake pads are worn?

A brake-pad warning light, a squeal or grinding noise when braking, longer stopping distances, or less than about 3 mm of pad material visible through the wheel. Grinding usually means the backing plate is touching the rotor and needs immediate attention.

Do I need new rotors with new pads?

Check the rotors' thickness against the minimum stamped on them and look for grooves or vibration. Rotors that are worn, scored or below minimum thickness should be replaced with the pads so the new pads bed in on a fresh surface.

Do I need a new pad wear sensor?

On many European cars, yes. The sensor is designed to be worn through by the pad; once the warning has come on, or if the sensor was damaged during removal, it has to be replaced.

How do I break in new brake pads?

Follow the pad maker's bedding procedure, usually several moderate stops from speed without coming to a complete stop, then letting the brakes cool. Avoid hard stops for the first few hundred miles.

How do I make sure this brake pad set fits my car?

Compare the part numbers listed on this page with the number on your old part or in your vehicle's parts catalog, and check the fitment information. If you are unsure, contact us with your VIN before ordering.