Schrick 320° camshaft for the AUDI , VW EA 827 4 cyl., 2 valve, 1,5-2,0L engine. Machined by AVL Schrick in Remscheid, Germany, this profile raises valve lift to 12.9 mm for greater cylinder filling and top-end power over the factory camshaft.
Key Features & Benefits
- 320° duration — 293° measured at 1 mm lift
- 12.9 mm valve lift (12.9 mm cam lobe lift)
- 0.25 mm valve clearance — solid lash, mechanical adjustment
- Made by Schrick, OE supplier and motorsport camshaft specialist
Important Fitment Notes
Grundkreis Ø 34 for umgebaute hydraulic Zylinderköpfe, not for Stössel with obenliegender Einstellscheibe, (Lauffläche Ø35 erforderlich).
Technical Specifications
| Engine | EA 827 4 cyl., 2 valve, 1.5-2.0L |
| Duration intake | 320° |
| Duration intake @ 1 mm | 293° |
| Duration exhaust | 320° |
| Duration exhaust @ 1 mm | 293° |
| Intake peak timing | 102° |
| Exhaust peak timing | 102° |
| Cam lobe lift intake | 12.9 mm |
| Cam lobe lift exhaust | 12.9 mm |
| Valve lift without valve clearance intake | 12.9 mm |
| Valve lift without valve clearance | 12.9 mm |
| Valve clearance intake | 0.25 mm |
| Valve clearance exhaust | 0.3 mm |
| Intake opens | 58° |
| Intake closes | 82° |
| Exhaust opens | 82° |
| Exhaust closes | 58° |
| Intake opens @ 1 mm (EM) 1 | -44° |
| Intake closes @ 1 mm (EM) 1 | 248° |
| Exhaust opens @ 1 mm (AM) 1 | -248° |
| Exhaust closes @ 1 mm (AM) 1 | 44° |
| Valve lift @ TDC intake (EM) 1 | 6.1 mm |
| Valve lift @ TDC exhaust (AM) 1 | 6.1 mm |
Installation Notes
Professional installation recommended. Camshaft timing must be set to the specification above; refer to the Schrick data sheet for the full timing diagram.
Download the Schrick data sheet (PDF) — part 001401200-01.
This part also goes by the following cross reference.
Cross Reference Part Number: