Ir a contenido

DENSO A/C Compressor - DCP17038

Disponibilidad:
¡Solo 5 izquierda!

Ships same or next business day

SKU DCP17038
Precio original $500.59 - Precio original $500.59
Precio original
$500.59
$500.59 - $500.59
Precio actual $500.59
Rewards
EARN REWARD POINTS
Purchasing this product will earn you 2500 points to redeem on future purchases. Check your points.

DENSO

A/C Compressor

This product also goes by these part numbers: 0012305511

When replacing this A/C Compressor, also inspect the Alternator Pulley. The Alternator Pulley must spin freely in a counter clockwise direction. If not, the Pulley must be replaced. Otherwise the Compressor may fail prematurely.

This part also goes by the following cross reference.

Cross Reference Part Number: 0012305511

About this A/C Compressor

The DENSO DCP17038 A/C compressor is the heart of your car's air-conditioning system. Driven by the engine's accessory belt, it pressurizes the refrigerant and circulates it through the condenser and evaporator so the cabin can be cooled.

Frequently asked questions

What does an A/C compressor do?

It compresses low-pressure refrigerant vapor into high-pressure vapor and pumps it through the system. Without it the refrigerant does not circulate and the A/C blows warm air.

What are the signs of a failing A/C compressor?

Warm air from the vents, grinding or squealing when the A/C is switched on, a compressor clutch that does not engage (on clutch-type compressors), or refrigerant and oil leaking at the compressor. Low refrigerant, a failed pressure sensor or an electrical fault can cause similar symptoms, so have the system diagnosed first.

Can I replace an A/C compressor myself?

Removing and fitting the compressor is mechanical work, but the refrigerant must be recovered before the system is opened, and the system must be evacuated and recharged afterwards with the correct refrigerant (R134a or R1234yf) and amount. That needs A/C service equipment, so many owners have a shop handle those steps.

What should I replace along with the compressor?

Replace the receiver-drier or accumulator and the expansion valve or orifice tube, flush the lines and condenser (especially after an internal compressor failure), and fit new O-rings. Check the compressor oil type and quantity against your vehicle's specification. Many compressor warranties require these steps.

How do I make sure this compressor fits my car?

Compare the part numbers listed on this page with the number on your old compressor or in your vehicle's parts catalog, and check the fitment information. If you are unsure, contact us with your VIN before ordering.