Ir a contenido
Febi Bilstein Brake Pad Sensor 33402
FEBI BILSTEIN Brake Pad Sensor - 33402
Febi Bilstein Brake Pad Sensor 33402
FEBI BILSTEIN Brake Pad Sensor - 33402

Febi Bilstein Brake Pad Sensor 33402

FEBI BILSTEIN
Disponibilidad:
5+ en stock, listo para ser enviado

Ships same or next business day

SKU 33402
$9.89 - $9.89
$9.89
$9.89 - $9.89
$9.89
CALIFORNIA WARNING

Handling passenger or off-highway motor vehicle parts can expose you to chemicals such as phthalates and lead, which can cause cancer and reproductive harm. To minimize exposure, service the vehicle in a well-ventilated area, wear gloves, and wash your hands. For more information see www.P65Warnings.ca.gov/motor-vehicle-parts.

Rewards
EARN REWARD POINTS
Purchasing this product will earn you 45 points to redeem on future purchases. Check your points.

FEBI BILSTEIN

Brake Pad Sensor

This product also goes by these part numbers: 997 612 759 01, 99761275901, 33402

This part also goes by the following cross reference.

Cross Reference Part Number: 99761275901

Fits These Vehicles 15 applications
987 Boxster
Make Model Engine Years
PORSCHE BOXSTER (987) S 3.4 2009–2011
PORSCHE BOXSTER (987) 2.9 2009–2012
PORSCHE BOXSTER (987) 2.9 2009–2012
PORSCHE BOXSTER (987) S 3.4 (987.760, 987.761, 987.320) 2010–2012
PORSCHE BOXSTER Spyder (987) 3.4 (987.720) 2010–2011
997 911
Make Model Engine Years
PORSCHE 911 (997) 3.6 Carrera 2004–2008
PORSCHE 911 (997) 3.6 Carrera 4 2004–2008
PORSCHE 911 Convertible (997) 3.6 Carrera 2005–2008
PORSCHE 911 Convertible (997) 3.6 Carrera 4 2005–2008
PORSCHE 911 Targa (997) 3.6 Carrera 4 2006–2008
987 Cayman
Make Model Engine Years
PORSCHE CAYMAN (987) S 3.4 2005–2009
PORSCHE CAYMAN (987) 2.7 2006–2009
PORSCHE CAYMAN (987) 2.9 2009–2012
PORSCHE CAYMAN (987) S 3.4 2009–2013
PORSCHE CAYMAN (987) 2.9 2009–2013

Fitment data last updated: 2026-05-15

Fits 15 vehicle applications Check vehicle fitment before ordering View fitment

About this Brake Pad Wear Sensor

The FEBI BILSTEIN 33402 brake pad wear sensor warns you, through a dashboard light, when your brake pads are nearly worn out. It sits in the pad and is designed to be worn through, so it usually needs replacing along with the pads.

Frequently asked questions

How does a brake pad wear sensor work?

A wire loop inside the sensor tip sits at the pad's minimum thickness. When the pad wears down, the rotor wears through the loop, breaking the circuit and turning on the warning light.

When do I need to replace the sensor?

Replace it whenever the warning has come on, because the worn loop cannot be reused, and whenever it is damaged during a pad change. Many owners replace it with every pad change.

Do both axles have a sensor?

Many European cars have one sensor on the front axle and one on the rear, usually on one wheel only. Check which axle this sensor is for in the product details and fitment information.

Can I replace the sensor myself?

Yes, it is usually done during a pad change: clip the sensor into the new pad, route the wire away from moving and hot parts, and connect it. The warning light may need a short drive, or on some cars a reset, to clear.

How do I make sure this brake pad wear sensor fits my car?

Compare the part numbers listed on this page with the number on your old part or in your vehicle's parts catalog, and check the fitment information. If you are unsure, contact us with your VIN before ordering.

Euromotiv is an independent retailer of OEM, Genuine, and aftermarket automotive parts. We are not affiliated with, endorsed by, or authorized by Audi AG, Volkswagen AG, BMW AG, Mercedes-Benz Group AG, Dr. Ing. h.c. F. Porsche AG, MINI, or any other vehicle manufacturer. All trademarks, logos, and brand names are the property of their respective owners and are used solely for identification and compatibility purposes.