Ir a contenido

Febi Bilstein Engine Mount 184089

Disponibilidad:
5+ en stock, listo para ser enviado
SKU 184089
Precio original $112.19 - Precio original $112.19
Precio original
$112.19
$112.19 - $112.19
Precio actual $112.19
CALIFORNIA WARNING

Handling passenger or off-highway motor vehicle parts can expose you to chemicals such as phthalates and lead, which can cause cancer and reproductive harm. To minimize exposure, service the vehicle in a well-ventilated area, wear gloves, and wash your hands. For more information see www.P65Warnings.ca.gov/motor-vehicle-parts.

Rewards
EARN REWARD POINTS
Purchasing this product will earn you 560 points to redeem on future purchases. Check your points.

FEBI BILSTEIN

Engine Mount

This product also goes by these part numbers: 8E0 199 379 BJ, 8E0199379BJ, 184089

This part also goes by the following cross reference.

Cross Reference Part Number: 8E0199379BJ

Fits These Vehicles 29 applications
C5 A6
Make Model Engine Years
AUDI A6 C5 (4B2, 4B4) 2.5 TDI 2000–2005
AUDI A6 C5 (4B2, 4B4) 2.5 TDI quattro 2000–2005
AUDI A6 C5 (4B2, 4B4) 2.5 TDI 2001–2005
AUDI A6 C5 (4B2, 4B4) 2.5 TDI 2002–2005
AUDI A6 C5 Avant (4B5, 4B6) 2.5 TDI 2000–2005
AUDI A6 C5 Avant (4B5, 4B6) 2.5 TDI quattro 2000–2005
AUDI A6 C5 Avant (4B5, 4B6) 2.5 TDI 2001–2005
AUDI A6 C5 Avant (4B5, 4B6) 2.5 TDI 2002–2005
A4
Make Model Engine Years
AUDI A4 B6 (8E2) 2.5 TDI quattro 2000–2004
AUDI A4 B6 (8E2) 2.5 TDI 2001–2002
AUDI A4 B6 (8E2) 2.5 TDI 2002–2004
AUDI A4 B6 Avant (8E5) 2.5 TDI quattro 2001–2004
AUDI A4 B6 Avant (8E5) 2.5 TDI 2001–2002
AUDI A4 B6 Avant (8E5) 2.5 TDI 2002–2004
AUDI A4 B6 Convertible (8H7) 2.5 TDI 2002–2005
AUDI A4 B7 Avant (8ED) 2.0 TFSI quattro 2004–2008
AUDI A4 B7 Avant (8ED) 2.0 TFSI 2004–2008
AUDI A4 B7 Avant (8ED) 2.7 TDi 2005–2008
AUDI A4 B7 Avant (8ED) 2.0 TFSI 2005–2008
AUDI A4 B7 Avant (8ED) 2.0 TFSI quattro 2005–2008
AUDI A4 B7 Avant (8ED) 2.7 TDI 2006–2008
AUDI A4 B7 Convertible (8HE) 2.0 TFSI quattro 2005–2009
AUDI A4 B7 Convertible (8HE) 2.7 TDI 2006–2009
AUDI A4 B7 Convertible (8HE) 3.0 TDI quattro 2006–2009
AUDI A4 B7 Convertible (8HE) 3.0 TDI quattro 2006–2009
B7 A4
Make Model Engine Years
AUDI A4 B7 (8EC) 2.0 TFSI quattro 2004–2008
AUDI A4 B7 (8EC) 2.7 TDI 2005–2008
AUDI A4 B7 (8EC) 2.0 TFSI quattro 2005–2008
AUDI A4 B7 (8EC) 2.7 TDI 2006–2008
Fits 29 vehicle applications Check vehicle fitment before ordering View fitment

About this Engine Mount

The FEBI BILSTEIN 184089 engine mount holds the engine in the car and absorbs its vibration. Mounts are rubber or fluid-filled, and as they age they sag, crack or leak, letting the engine move more and passing vibration into the cabin.

Frequently asked questions

What does an engine mount do?

It secures the engine to the body or subframe while isolating engine vibration, and it limits how much the engine rocks under acceleration and braking.

What are the signs of a failing engine mount?

Increased vibration at idle, a clunk when accelerating, shifting or letting off the throttle, visible engine movement, cracked rubber, or fluid leaking from a hydraulic mount.

Should I replace both engine mounts?

Mounts work as a set and wear at a similar rate, so replacing both sides together is recommended. Inspect the transmission mount at the same time, since a worn one puts extra load on the new engine mounts.

Can I replace an engine mount myself?

It is possible with the engine properly supported from above or below while the mount is removed. Never work under an engine that is only held by a jack, and tighten fasteners to the manufacturer's specification.

How do I make sure this engine mount fits my car?

Compare the part numbers listed on this page with the number on your old part or in your vehicle's parts catalog, and check the fitment information. If you are unsure, contact us with your VIN before ordering.