The Brembo Disc Brake Pad Wear Sensor (part A00206) is a high-grade front replacement sensor for Audi, Porsche, and Volkswagen SUVs. It ensures accurate wear detection for optimal braking performance and safety. Built to OEM specifications for direct compatibility and long service life.
Key Features & Benefits
- High-Grade Materials: Resists wear and corrosion for extended durability.
- Accurate Wear Indication: Provides reliable warning when pads need replacement.
- OEM Cross-Reference: Compatible with 7L0907637, 95561236500, 95561236501.
- Simple Installation: Direct swap with OE sensor; no modifications required.
Vehicle Fitment
| Make | Model | Years | Engine |
|---|---|---|---|
| Audi | Q7 | 2009–2015 | 3.0V6 |
| Volkswagen | Touareg | 2007–2010 | 3.6V6 |
| Volkswagen | Touareg | 2009–2010 | 3.0V6 |
| Porsche | Cayenne | 2008–2010 | 4.8V8 |
| Audi | Q7 | 2007–2010 | 4.2V8 |
| Volkswagen | Touareg | 2004–2009 | 4.2V8 |
| Volkswagen | Touareg | 2006–2008 | 5.0V10 |
| Volkswagen | Touareg | 2004–2006 | 3.2V6 |
| Porsche | Cayenne | 2003–2006 | 4.5V8 |
| Porsche | Cayenne | 2004–2006 | 3.2V6 |
| Volkswagen | Touareg | 2004 | 4.9V10 |
Technical Specifications
| Part Number | A00206 |
| OEM Cross-References | 7L0907637, 95561236500, 95561236501 |
| Position | Front |
Installation Notes
Direct plug-in replacement; no programming needed.
About BREMBO
Brembo is a premier brake system manufacturer, supplying OE and aftermarket solutions for high-performance and luxury vehicles.
This part also goes by the following cross reference.
Cross Reference Part Number:
Fits These Vehicles
| Make | Model | Engine | Years |
|---|---|---|---|
| Audi | Q7 | 3.0V6 | 2009–2015 |
| Audi | Q7 | 4.2V8 | 2007–2010 |
| Audi | Q7 | 3.6V6 | 2007–2010 |
| Make | Model | Engine | Years |
|---|---|---|---|
| Volkswagen | Touareg | 3.6V6 | 2007–2010 |
| Volkswagen | Touareg | 3.0V6 | 2009–2010 |
| Volkswagen | Touareg | 4.2V8 | 2004–2009 |
| Volkswagen | Touareg | 5.0V10 | 2006–2008 |
| Volkswagen | Touareg | 3.2V6 | 2004–2006 |
| Volkswagen | Touareg | 4.9V10 | 2004–2004 |
| Make | Model | Engine | Years |
|---|---|---|---|
| Porsche | Cayenne | 4.5V8 | 2003–2006 |
| Porsche | Cayenne | 3.2V6 | 2004–2006 |
| Make | Model | Engine | Years |
|---|---|---|---|
| Porsche | Cayenne | 4.8V8 | 2008–2010 |
| Porsche | Cayenne | 3.6V6 | 2008–2010 |
About this Brake Pad Wear Sensor
The BREMBO A00206 brake pad wear sensor warns you, through a dashboard light, when your brake pads are nearly worn out. It sits in the pad and is designed to be worn through, so it usually needs replacing along with the pads.
Frequently asked questions
How does a brake pad wear sensor work?
A wire loop inside the sensor tip sits at the pad's minimum thickness. When the pad wears down, the rotor wears through the loop, breaking the circuit and turning on the warning light.
When do I need to replace the sensor?
Replace it whenever the warning has come on, because the worn loop cannot be reused, and whenever it is damaged during a pad change. Many owners replace it with every pad change.
Do both axles have a sensor?
Many European cars have one sensor on the front axle and one on the rear, usually on one wheel only. Check which axle this sensor is for in the product details and fitment information.
Can I replace the sensor myself?
Yes, it is usually done during a pad change: clip the sensor into the new pad, route the wire away from moving and hot parts, and connect it. The warning light may need a short drive, or on some cars a reset, to clear.
How do I make sure this brake pad wear sensor fits my car?
Compare the part numbers listed on this page with the number on your old part or in your vehicle's parts catalog, and check the fitment information. If you are unsure, contact us with your VIN before ordering.