Audi RS3 8V

WAS-041 Fitting Instructions Anti-squat suspensions are used to reduce body squat by altering the rear suspension so that the forces resulting from...

WAS-048 Fitting InstructionsWhen using the car on track it is impossible to set up proper rear camber with OEM arms. The more stress you put on the...

WAS-564 Fitting Instructions After long CAD development based on 3D scan of OEM subframe, tested with CAD FEA (Finite element method) and road-goin...

WAS-561 Fitting InstructionsAfter long CAD development based on 3D scan of OEM subframe, tested with CAD FEA (Finite element method) and road-going...

SBK-018 Fitting InstructionsSetting the suspension geometry of a car always starts from the rear axle and it mainly depends on it how the car drive...

WAS-017 Fitting InstructionsWhen using the car on the track the cornering forces are bending the rubber in the wishbones (control arms). Thus chang...

ELA-062 Fitting InstructionsWhen using the car on track it is impossible to set up proper rear camber with OEM arms. The more stress you put on the...

WAS-570 Fitting InstructionsAfter long CAD development based on 3D scan of OEM subframe, tested with CAD FEA (Finite element method) and road-going...

WAS-016 Fitting InstructionsWhen using the car on the track the cornering forces are bending the rubber in the wishbones (control arms). Thus chang...

When using the car on the track rear sway bar / anti-roll bar plays important role in car handling. It is connected to the wishbones by sway bar li...

TRS-008 Fitting InstructionsWhen using the car on track it is impossible to set up proper rear aliment with OEM arms. The more stress you put on th...

WAS-513 Fitting InstructionsFor performance driving toe angle is one of the most important suspension setup parameters. To control it over the enti...