NEUSPEED

The NEUSPEED Boost Tap plugs directly into the intake manifold where the factory Manifold Absolute Pressure (MAP) sensor is located. Installing th...

Replacement brake pad wear sensor for Mk6/7 VW platform, and some Mk5. Fits: Audi TTS 8S caliper retrofitted to other MQB vehicles Big brake ki...

DESCRIPTION: If you have installed a new big brake kit or installed new brake pads that do not include a brake pad wear sensor wire, then this is ...

DESCRIPTION: If you have installed a new big brake kit or installed new brake pads that do not include a brake pad wear sensor wire, then this is ...

  NEUSPEED synthetic grease contains Teflon and is formulated to seal out water and to lubricate under the most adverse conditions with superior ...

Complete o-ring kit to rebuild NM Engineering N14 Catch Tank kit. Kit includes: 1x Reservoir o-ring2x Front valve cover fitting o-ring1x Rear valv...

Neuspeed Diverter Valve For 1.8T Mk4/8N TT

During aggressive acceleration, the engine and transmission rotate due to the flexibility of the factory bushings. Although these soft bushings ef...

    Under hard acceleration, your entire engine and transmission actually rotate due to compliance in the factory bushings. While the soft factor...

Launching your car at full throttle from a standing start will usually result in an annoying "clunk" followed by a slight vibration. This is caus...

Under hard acceleration, your entire engine and transmission actually rotate due to compliance in the factory bushings. While the soft factory bu...

  Replacement exhaust gasket for NEUSPEED exhaust system. Constructed of metal outer layers with a composite inner layer. Notes 60mm Gasket: Out...

The Factory Intercooler Delete Kit is for vehicles using a Front Mount Intercooler (FMIC) that bypasses factory intercooler and is no longer bein...

  Thermostatic fan switch turns the fan on at 180° F (stock 197° F). Notes Fits: VW Rabbit, Jetta I, Scirocco I and Fox.

  Thermostatic fan switch turns the fan on at 185° / 199° F (stock 197° / 212° F). Notes Fits: VW Cabrio, Corrado, Golf II, Golf III, Jetta II, J...

The NEUSPEED Front Mount Intercooler Hardware Kit includes all of the supporting components required to install a NEUSPEED FMIC system—excluding t...

Neuspeed Front Mount Intercooler For CC B6

NEUSPEED's Front Mount Intercooler (FMIC) kit for the VW Mk6 Jetta GLI 2.0 TSI 210HP requires absolutely no cutting or trimming of the metal bump...

NEUSPEED's Front Mount Intercooler Kit for the VW MkV 2.0T requires absolutely no drilling, cutting, or trimming of the metal bumper structure o...

NEUSPEED's Front Mount Intercooler (FMIC) kit for the VW Mk6 GTI / Golf R 2.0T requires absolutely no cutting or trimming of the metal bumper str...

Designed for the VW MK7/MK7.2 GTI, NEUSPEED's Front Mount Intercooler (FMIC) kit provides maximum HP and efficient air charge cooling without any ...

NEUSPEED's Front Mount InterCooler (FMIC) kit for the VW MK7/ MK7.2 Golf R requires absolutely no cutting or trimming to the metal bumper structu...