Schrick 268° camshaft for the AUDI , VW EA 827 4 cyl., 2 valve, 1,5-2,0L engine. Machined by AVL Schrick in Remscheid, Germany, this profile raises valve lift to 11.2 mm for greater cylinder filling and top-end power over the factory camshaft.
Key Features & Benefits
- 268° duration — 231° measured at 1 mm lift
- 11.2 mm valve lift (11.2 mm cam lobe lift)
- Hydro lash
- Made by Schrick, OE supplier and motorsport camshaft specialist
Important Fitment Notes
Nur for G60.
Technical Specifications
| Engine | EA 827 4 cyl., 2 valve, 1.5-2.0L |
| Duration intake | 268° |
| Duration intake @ 1 mm | 231° |
| Duration exhaust | 276° |
| Duration exhaust @ 1 mm | 238° |
| Intake peak timing | 112° |
| Exhaust peak timing | 112° |
| Cam lobe lift intake | 11.2 mm |
| Cam lobe lift exhaust | 11.5 mm |
| Valve lift without valve clearance intake | 11.2 mm |
| Valve lift without valve clearance | 11.5 mm |
| Valve clearance intake | hydro |
| Valve clearance exhaust | hydro |
| Intake opens | 22° |
| Intake closes | 66° |
| Exhaust opens | 70° |
| Exhaust closes | 26° |
| Intake opens @ 1 mm (EM) 1 | -3° |
| Intake closes @ 1 mm (EM) 1 | 228° |
| Exhaust opens @ 1 mm (AM) 1 | -231° |
| Exhaust closes @ 1 mm (AM) 1 | 8° |
| Valve lift @ TDC intake (EM) 1 | 1.3 mm |
| Valve lift @ TDC exhaust (AM) 1 | 1.8 mm |
| Additional engine information : | , G60 |
Installation Notes
Professional installation recommended. Camshaft timing must be set to the specification above; refer to the Schrick data sheet for the full timing diagram.
Download the Schrick data sheet (PDF) — part 001401681-02.
This part also goes by the following cross reference.
Cross Reference Part Number: