Skip to content

MK6 Audi/VW Performance Fuel Pumps

Ships from Supplier
Ships from Supplier
Ships from Supplier
Ships from Supplier
Ships from Supplier
Ships from Supplier
SKU 601-0142
Original price $574.99 - Original price $979.99
Original price $574.99
$574.99
$574.99 - $979.99
Current price $574.99
CALIFORNIA WARNING

Handling passenger or off-highway motor vehicle parts can expose you to chemicals such as phthalates and lead, which can cause cancer and reproductive harm. To minimize exposure, service the vehicle in a well-ventilated area, wear gloves, and wash your hands. For more information see www.P65Warnings.ca.gov/motor-vehicle-parts.

Pump Selection: Stage 2
Drive Wheels: FWD
Rewards
EARN REWARD POINTS
Purchasing this product will earn you 2870 points to redeem on future purchases. Check your points.

The Precision Raceworks MK6 AUDI/ VW LOW PRESSURE FUEL PUMP's are designed for customers looking to run all blends of E85. All pump options below include a Genuine Walbro 450 (F90000274), Walbro 525 (F90000285), or Walbro 535 (F90000295) fuel pump capable of flowing up to 200% more fuel than the factory fuel pump and all options are 100% E85 compliant.



  • Stage 2 (2 liters per minute)
  • Our Stage 2 fuel pump features a single Walbro 450 (F90000274) fuel pump. This pump can support up to 500whp (Rated for 450whp on 100% E85) and is ready to grow with you as your needs demand. By design this pump allows you to purchase one of our replacement Stage 2.5 pump's and replace the pump only when you need more fuel. Meaning you don't need to buy a new kit simply upgrade this one as your needs change. 
    • Included in the box
      • One Walbro 450 (F90000274) fuel pump
      • All necessary hardware
      • Fuel filter


  • Stage 2.5 (2.36 liters per minute)
    Our Stage 2.5 fuel pump features a single Walbro 535 (F90000295) fuel pump. This pump can support up to 550whp (Rated for 475whp on 100% E85) and is ready to grow with you as your needs demand. 

    • Included in the box
      • One Walbro 535 (F90000295) fuel pump
      • All necessary hardware
      • Fuel filter

  • Stage 3  (5.5 liters per minute)
    Our Stage 3 fuel pump features a dual Walbro 450 (F90000274) fuel pump. This pump can support over 600whp  

    • Included in the box
      • Two Walbro 450 (F90000274) fuel pump
      • All necessary hardware
      • Fuel filter



All units come pre-assembled and pre-wired.  This is a 'Drop-In' pump that is easy to handle in the comfort of your own garage


**All Stages require aftermarket pump controller**


    This part also goes by the following cross reference.

    Cross Reference Part Number:

    About this Fuel Pump

    The Precision Raceworks 601-0142 fuel pump moves fuel from the tank to the engine at the pressure the fuel-injection system needs. Most modern European cars use an electric pump mounted inside the fuel tank, often as part of a module with the fuel-level sender and a strainer.

    Frequently asked questions

    What does a fuel pump do?

    It draws fuel from the tank and delivers it to the engine at the pressure the injection system requires. If pressure drops, the engine can run lean, lose power or fail to start.

    What are the signs of a failing fuel pump?

    Long cranking before the engine starts, hesitation or loss of power under load, stalling, a whining or buzzing noise from the tank, or a no-start. A clogged filter, a failed relay or a wiring fault can cause the same symptoms, so check fuel pressure before replacing the pump.

    Can I replace a fuel pump myself?

    On many cars the pump is reached through an access panel under the rear seat or trunk floor; on others the tank has to be lowered. Relieve the fuel system pressure, disconnect the battery, work in a well-ventilated area away from sparks and flames, and fit a new seal or O-ring at the pump flange. If you are unsure, have a professional install it.

    What should I replace along with the fuel pump?

    Replace the tank seal or O-ring and, if your car has a separate one, the fuel filter. Inspect the strainer and the electrical connector. If the old pump failed because of dirt or debris, clean the tank before fitting the new pump.

    How do I make sure this pump fits my car?

    Compare the part numbers listed on this page with the number on your old pump or in your vehicle's parts catalog, and check the fitment information. If you are unsure, contact us with your VIN before ordering.