Skip to content
Tie rods for Porsche 993 RS

Elephant Racing RS Tie Rods, 993

ELEPHANT RACING
Ships from Supplier
SKU 1-99334703180
$420.00 - $420.00
$420.00
$420.00 - $420.00
$420.00
CALIFORNIA WARNING

Handling passenger or off-highway motor vehicle parts can expose you to chemicals such as phthalates and lead, which can cause cancer and reproductive harm. To minimize exposure, service the vehicle in a well-ventilated area, wear gloves, and wash your hands. For more information see www.P65Warnings.ca.gov/motor-vehicle-parts.

Rewards
EARN REWARD POINTS
Purchasing this product will earn you 2100 points to redeem on future purchases. Check your points.

Fitment: ’95-’98 993 RS

RS tie rods use harder compound rubber and improve both steering precision and feedback. RS wheel carriers are required to use these tie rods. Additionally, pairing these tie rods with RS style wheel carrier reduce effects of bump steer and is a must for cars that are lowered more than 30mm.

993 RS stock height is 50mm lower than US spec cars and 20-30mm lower than European spec cars.

Kits come with outer and inner tie rods, two kits required per car.

The outer tie rids can also be used with standard or M030 tie rod ends. Hover These are only sold as a kit of inner and outer tie rods.

This part also goes by the following cross reference.

Cross Reference Part Number:

About this Tie Rod

The ELEPHANT RACING 1-99334703180 tie rod connects the steering rack to the steering knuckle, turning the wheels when you turn the steering wheel. Worn tie rods cause loose steering and uneven tire wear and must be replaced promptly.

Frequently asked questions

What does a tie rod do?

It transmits steering movement from the rack to each front wheel and sets the wheel's toe angle. Inner and outer tie rods each have a joint that allows the suspension to move while you steer.

What are the signs of a worn tie rod?

Loose or vague steering, a clunk when turning, the car pulling or wandering, uneven wear on the inner or outer edge of the tires, or a torn rubber boot on the joint.

Do I need an alignment after replacing a tie rod?

Yes. Tie rods set toe, and even careful measuring cannot replace a proper alignment afterwards. Driving without one can wear tires quickly.

Should I replace inner and outer tie rods together?

Replace whichever joint is worn. If both are original and high-mileage, replacing them together, and doing both sides, avoids paying for a second alignment soon after.

How do I make sure this tie rod fits my car?

Compare the part numbers listed on this page with the number on your old part or in your vehicle's parts catalog, and check the fitment information. If you are unsure, contact us with your VIN before ordering.

Euromotiv is an independent retailer of OEM, Genuine, and aftermarket automotive parts. We are not affiliated with, endorsed by, or authorized by Audi AG, Volkswagen AG, BMW AG, Mercedes-Benz Group AG, Dr. Ing. h.c. F. Porsche AG, MINI, or any other vehicle manufacturer. All trademarks, logos, and brand names are the property of their respective owners and are used solely for identification and compatibility purposes.