Skip to content
Bilstein B6 01-05 Spartan Motors IFS 1360 Front 46mm Monotube Shock Absorber
Bilstein B6 01-05 Spartan Motors IFS 1360 Front 46mm Monotube Shock Absorber
Bilstein B6 01-05 Spartan Motors IFS 1360 Front 46mm Monotube Shock Absorber
Bilstein B6 01-05 Spartan Motors IFS 1360 Front 46mm Monotube Shock Absorber
Bilstein B6 01-05 Spartan Motors IFS 1360 Front 46mm Monotube Shock Absorber
Bilstein B6 01-05 Spartan Motors IFS 1360 Front 46mm Monotube Shock Absorber
Bilstein B6 01-05 Spartan Motors IFS 1360 Front 46mm Monotube Shock Absorber
Bilstein B6 01-05 Spartan Motors IFS 1360 Front 46mm Monotube Shock Absorber
Bilstein B6 01-05 Spartan Motors IFS 1360 Front 46mm Monotube Shock Absorber
Bilstein B6 01-05 Spartan Motors IFS 1360 Front 46mm Monotube Shock Absorber

Bilstein B6 01-05 Spartan Motors IFS 1360 Front 46mm Monotube Shock Absorber

BILSTEIN
Availability:
5+ in stock, ready to be shipped
SKU BIL24-241755
Save 18% Save 18%
$175.65
$175.65 - $175.65
$175.65
$144.00
$144.00 - $144.00
$144.00
CALIFORNIA WARNING

Handling passenger or off-highway motor vehicle parts can expose you to chemicals such as phthalates and lead, which can cause cancer and reproductive harm. To minimize exposure, service the vehicle in a well-ventilated area, wear gloves, and wash your hands. For more information see www.P65Warnings.ca.gov/motor-vehicle-parts.

Rewards
EARN REWARD POINTS
Purchasing this product will earn you 720 points to redeem on future purchases. Check your points.
Bilstein B6 shock absorbers and struts are the ideal choice for improving the performance of any vehicle. These shock absorbers and struts feature a monotube design which provides consistent fade free performance. Bilstein B6 shock absorbers and struts utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions to provide consistent fade free performance. All B6 shock absorbers and struts are tuned for each specific application to assure optimal performance is achieved. Bilstein B6 shock absorbers and struts offer a significant improvement in ride quality, handling, and comfort.

This part also goes by the following cross reference.

Cross Reference Part Number:

About these Shocks & Struts

The BILSTEIN BIL24-241755 shock absorber or strut controls how the springs compress and rebound, keeping the tires in contact with the road. Worn dampers make a car bounce, dive under braking and lose grip, even when the springs are fine.

Frequently asked questions

What are the signs of worn shocks or struts?

Continued bouncing after a bump, nose dive under braking, body roll in corners, oil leaking from the body of the shock, clunks over bumps, or uneven, cupped tire wear.

Should shocks and struts be replaced in pairs?

Yes, always replace them in pairs on the same axle so both sides damp the same way. Replacing only one side can make the car unstable.

What should I replace along with them?

Inspect and usually replace the top mounts, bump stops and dust boots at the same time; worn mounts cause noise and new dampers can be damaged by torn boots. Check the springs for cracks or sagging.

Can I install struts myself?

A strut combines the damper and spring, so disassembly requires compressing the spring with a proper spring compressor. That is dangerous without the right tools. After fitting struts, have an alignment done.

How do I make sure this shock absorber fits my car?

Compare the part numbers listed on this page with the number on your old part or in your vehicle's parts catalog, and check the fitment information. If you are unsure, contact us with your VIN before ordering.

Euromotiv is an independent retailer of OEM, Genuine, and aftermarket automotive parts. We are not affiliated with, endorsed by, or authorized by Audi AG, Volkswagen AG, BMW AG, Mercedes-Benz Group AG, Dr. Ing. h.c. F. Porsche AG, MINI, or any other vehicle manufacturer. All trademarks, logos, and brand names are the property of their respective owners and are used solely for identification and compatibility purposes.