{"product_id":"jhm-2-piece-lightweight-356mm-rotors-audi-d4-a8-s8-c7-a6-a7-s6-s7-rs7-jhm-2068x356x22","title":"JHM 2-Piece Lightweight (356mm) - Audi \/ D4 \/ A8 \/ S8 \/ C7 \/ A6 \/ A7 \/ S6 \/ S7 \/ RS7","description":"\u003cbr\u003e\u003cb data-mce-fragment=\"1\"\u003eThe Original Audi Lightweight Rotors engineered and manufactured in the USA since 2010! \u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cp data-mce-fragment=\"1\"\u003eDue to popular demand, all of our 2-piece, lightweight rotors will now come with black anodized rotor hats featuring Type 3, hard anodizing, the highest quality and hardest anodizing available for aluminum. This will make the rotor hats more resistant to fade and wear and will hide brake dust better. Due to popular, demand all lightweight rotor rings will also feature zinc plating. This high quality coating will slow the effects of corrosion and keep your rotor rings looking good through the winters.\u003c\/p\u003e\u003cp data-mce-fragment=\"1\"\u003e\u003cb data-mce-fragment=\"1\"\u003eShaves 7lbs of unsprung weight from the rear of your car while increasing braking performance, plus they bolt on just like stock!\u003c\/b\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eThis is great alternative to a full on Big Brake Kit since the stock D4 A8-S8 and C7 A6-A7-S6-S7-RS7 is a stout 356mm (14') and most may not want to spend $2,000 plus for a full Big Brake Kit. We basically brought the same high performance great cooling designed rotor to these drop in (fit like stock) front rotors and at a 1\/4 of the price or less of a full Big Brake Kit. \u003c\/p\u003e\u003cp data-mce-fragment=\"1\"\u003e\u003cb data-mce-fragment=\"1\"\u003eFitment:\u003c\/b\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eD4 A8-S8 and C7 A6-A7-S6-S7-RS7 that came factory with a 356mm rotor\u003c\/strong\u003e\u003c\/p\u003e\u003cp data-mce-fragment=\"1\"\u003e\u003cb data-mce-fragment=\"1\"\u003eStock vs. JHM\u003c\/b\u003e\u003c\/p\u003e\u003cp data-mce-fragment=\"1\"\u003e-Rotor Weight: Stock = 18.5 lbs(each), JHM = 15lbs(each) - Almost 20% LIGHTER, 3.5lbs less each\u003cbr data-mce-fragment=\"1\"\u003e-Rotor Cooling Air-gap: Stock = 7.4mm(.291'), JHM = 10.35mm(.407') - LARGER for better cooling\u003cbr data-mce-fragment=\"1\"\u003e-Rotor Cooling Center Fin Design: \u003cspan data-mce-fragment=\"1\"\u003eStock = Directional (one pushing air IN, one pushing air OUT, same PN both sides), JHM = Directional, specific left and right side design- MORE EFFICIENT for better cooling\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e-Rotor OD: Stock = 356mm(14'), JHM = 356mm(14') - SAME\u003cbr data-mce-fragment=\"1\"\u003e-Rotor Thickness: Stock = 22mm(.866'), JHM = 22mm(.866') - SAME\u003cbr data-mce-fragment=\"1\"\u003e-Bolt pattern: - SAME (fits like an OEM rotor would)\u003c\/p\u003e\u003cp data-mce-fragment=\"1\"\u003e\u003cb data-mce-fragment=\"1\"\u003eINCLUDES:\u003c\/b\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e2 - JHM 2-piece Lightweight Front Rotors. (Each rotor weighs 3.5lbs less than stock for a total of 7lbs weight savings.) Almost 20% lighter!\u003c\/p\u003e\u003cp data-mce-fragment=\"1\"\u003e\u003ca data-mce-fragment=\"1\" href=\"https:\/\/jhmotorsports.com\/RandD\/JHM_Engraved_Rotor_Hat_Closeup.JPG\" class=\"blue\" target=\"_blank\" data-mce-href=\"https:\/\/jhmotorsports.com\/RandD\/JHM_Engraved_Rotor_Hat_Closeup.JPG\"\u003eClick to enlarge picture\u003c\/a\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003ca data-mce-fragment=\"1\" href=\"https:\/\/jhmotorsports.com\/RandD\/JHM_Engraved_Rotor_Hat_Closeup.JPG\" class=\"blue\" target=\"_blank\" data-mce-href=\"https:\/\/jhmotorsports.com\/RandD\/JHM_Engraved_Rotor_Hat_Closeup.JPG\"\u003e\u003cimg data-mce-fragment=\"1\" width=\"350\" src=\"https:\/\/jhmotorsports.com\/RandD\/JHM_Engraved_Rotor_Hat_Closeup.JPG\" alt=\"Audi B8 S4-S5 Brake Rotors (Rear) 2-piece Lightweight\" title=\"Audi B8 S4-S5 Brake Rotors (Rear) 2-piece Lightweight\" data-mce-src=\"https:\/\/jhmotorsports.com\/RandD\/JHM_Engraved_Rotor_Hat_Closeup.JPG\"\u003e\u003c\/a\u003e\u003c\/p\u003e\u003cp data-mce-fragment=\"1\"\u003e\u003cb data-mce-fragment=\"1\"\u003eOuter ring specs:\u003c\/b\u003e\u003cbr data-mce-fragment=\"1\"\u003eWe worked closely with a race brake manufacturer that supplies many NASCAR racers and a couple major brake kit companies. Due to their expertise we chose to have them build us the outer rings to our specs to fit the C7\/D4. 10 attachment points with 3\/8 inch zinc plated bolts for durability and strength.\u003c\/p\u003e\u003cp data-mce-fragment=\"1\"\u003e\u003cb data-mce-fragment=\"1\"\u003eCenter hat specs:\u003c\/b\u003e\u003cbr data-mce-fragment=\"1\"\u003eWe CNC machine the Aluminum center hats in house based on their recommended materials and thicknesses for durability. 10 attachment points for durability and strength. We also engrave JHM in them in 3 locations equal from each other, it looks clean and doesn't jump out or look tacky.\u003c\/p\u003e\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003ePlease note: \u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003eJH Motorsports does not recommend using EBC brake pads with our 2-piece lightweight rotors. Customer have reported and we have found EBC pads leave excessive pad deposits that can cause brake pulsation. Many EBC pads have a break in coating that reacts with the zinc plating used on our rotors\u003c\/span\u003e\u003c\/p\u003e","brand":"JH MOTORSPORTS","offers":[{"title":"Default Title","offer_id":42345806692413,"sku":"JHM-2068x356x22","price":1199.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0898\/5024\/files\/RS6-rotors_2_2_1.jpg?v=1747417152","url":"https:\/\/www.euromotiv.com\/fr\/products\/jhm-2-piece-lightweight-356mm-rotors-audi-d4-a8-s8-c7-a6-a7-s6-s7-rs7-jhm-2068x356x22","provider":"Euromotiv","version":"1.0","type":"link"}