Skip to content

Brembo Disc Brake Pad Wear Sensor – Front for Audi

BREMBO
Availability:
Out of stock
SKU A00484
Sold out
$4.95 - $4.95
$4.95
$4.95 - $4.95
$4.95
Rewards
EARN REWARD POINTS
Purchasing this product will earn you 20 points to redeem on future purchases. Check your points.

The Brembo Disc Brake Pad Wear Sensor (part number A00484) is a direct replacement for your Audi's front brake pad sensor, compatible with OEM part 8K0615121. It monitors brake pad wear and alerts you when replacement is needed, preventing rotor damage. Made from high-quality materials, it ensures reliable performance and easy installation.

Key Features & Benefits

  • Direct replacement: fits Audi models requiring part 8K0615121.
  • Durable construction: built to last with premium materials.
  • Safety feature: alerts driver when pads are worn.
  • Easy installation: simple plug-and-play setup.

Vehicle Fitment

Make Model Years Engine
Audi S5 2012–2017 3.0V6
Audi A5 Quattro 2012–2017 2.0L4
Audi allroad 2013–2016 2.0L4
Audi S4 2012–2016 3.0V6
Audi Q5 2011–2016 2.0L4
Audi A4 Quattro 2012–2016 2.0L4
Audi A4 2012–2016 2.0L4
Audi A7 Quattro 2014–2015 3.0V6
Audi A6 Quattro 2013–2015 3.0V6
Audi A6 2012–2015 2.0L4
Audi A5 2012–2014 2.0L4
Audi S5 2012 4.2V8
Audi Q5 2011–2012 3.2V6

Technical Specifications

Part Number A00484
OEM Cross-Reference 8K0615121

Installation Notes

Easy plug-and-play installation, no special tools required.

About Brembo

Brembo is a premier brake system manufacturer, trusted by luxury car brands worldwide.

This part also goes by the following cross reference.

Cross Reference Part Number:

Fits These Vehicles 14 applications
B8 A4
Make Model Engine Years
Audi allroad 2.0L4 2013–2016
Audi S4 3.0V6 2012–2016
Audi A4 Quattro 2.0L4 2012–2016
Audi A4 2.0L4 2012–2016
B8 A5
Make Model Engine Years
Audi S5 3.0V6 2012–2017
Audi A5 Quattro 2.0L4 2012–2017
Audi A5 2.0L4 2012–2014
Audi S5 4.2V8 2012–2012
C7 A6
Make Model Engine Years
Audi A6 Quattro 3.0V6 2013–2015
Audi A6 Quattro 2.0L4 2013–2015
Audi A6 2.0L4 2012–2015
C7 A7
Make Model Engine Years
Audi A7 Quattro 3.0V6 2014–2015
8R Q5
Make Model Engine Years
Audi Q5 2.0L4 2011–2016
Audi Q5 3.2V6 2011–2012
Fits 14 vehicle applications Check vehicle fitment before ordering View fitment

About this Brake Pad Wear Sensor

The BREMBO A00484 brake pad wear sensor warns you, through a dashboard light, when your brake pads are nearly worn out. It sits in the pad and is designed to be worn through, so it usually needs replacing along with the pads.

Frequently asked questions

How does a brake pad wear sensor work?

A wire loop inside the sensor tip sits at the pad's minimum thickness. When the pad wears down, the rotor wears through the loop, breaking the circuit and turning on the warning light.

When do I need to replace the sensor?

Replace it whenever the warning has come on, because the worn loop cannot be reused, and whenever it is damaged during a pad change. Many owners replace it with every pad change.

Do both axles have a sensor?

Many European cars have one sensor on the front axle and one on the rear, usually on one wheel only. Check which axle this sensor is for in the product details and fitment information.

Can I replace the sensor myself?

Yes, it is usually done during a pad change: clip the sensor into the new pad, route the wire away from moving and hot parts, and connect it. The warning light may need a short drive, or on some cars a reset, to clear.

How do I make sure this brake pad wear sensor fits my car?

Compare the part numbers listed on this page with the number on your old part or in your vehicle's parts catalog, and check the fitment information. If you are unsure, contact us with your VIN before ordering.

Euromotiv is an independent retailer of OEM, Genuine, and aftermarket automotive parts. We are not affiliated with, endorsed by, or authorized by Audi AG, Volkswagen AG, BMW AG, Mercedes-Benz Group AG, Dr. Ing. h.c. F. Porsche AG, MINI, or any other vehicle manufacturer. All trademarks, logos, and brand names are the property of their respective owners and are used solely for identification and compatibility purposes.