The Brembo Disc Brake Pad Wear Sensor (Part No. A00354) is a high-quality replacement sensor designed for select Audi vehicles. It provides accurate brake pad wear readings to your vehicle's computer, ensuring timely maintenance and safe braking performance. Manufactured from premium materials, this sensor withstands extreme heat and pressure, offering reliability that meets OEM standards.
Key Features & Benefits
- High-Temperature Resistance: Engineered to withstand extreme heat and pressure for consistent performance.
- Accurate Wear Monitoring: Delivers precise brake pad wear data to the vehicle's ECU.
- Easy Installation: Plug-and-play design requires no special tools.
- Premium Construction: Manufactured from high-grade materials for long-lasting durability.
- OEM Compatible: Direct replacement for part numbers 4G0615121B and 8T0907637.
- Safety Critical: Helps ensure your brake system is always in optimal condition.
Vehicle Fitment
| Make | Model | Years | Engine |
|---|---|---|---|
| Audi | S5 | 2010–2011 | 3.0V6 |
| Audi | S5 | 2017 | 3.0V6 |
| Audi | A5 Quattro | 2010–2011 | 2.0L4 |
| Audi | A5 Quattro | 2017 | 2.0L4 |
| Audi | S5 | 2008–2011 | 4.2V8 |
| Audi | S4 | 2010–2011 | 3.0V6 |
| Audi | A5 | 2010–2011 | 2.0L4 |
| Audi | A4 Quattro | 2009–2011 | 2.0L4 |
| Audi | A4 | 2009–2011 | 2.0L4 |
| Audi | Q5 | 2009–2010 | 3.2V6 |
| Audi | A5 Quattro | 2008–2010 | 3.2V6 |
| Audi | A4 Quattro | 2009 | 3.2V6 |
Technical Specifications
| Part Number | A00354 |
| OEM Cross-References | 4G0615121B, 8T0907637 |
| Position | Front |
| Brand | Brembo |
Installation Notes
Simple plug-and-play installation; no special tools required.
About BREMBO
Brembo is a world leader in high-performance brake systems, trusted by OEMs and motorsports teams for superior quality and reliability.
This part also goes by the following cross reference.
Cross Reference Part Number:
Fits These Vehicles
| Make | Model | Engine | Years |
|---|---|---|---|
| Audi | S4 | 3.0V6 | 2010–2011 |
| Audi | A4 Quattro | 2.0L4 | 2009–2011 |
| Audi | A4 | 2.0L4 | 2009–2011 |
| Audi | A4 Quattro | 3.2V6 | 2009–2009 |
| Make | Model | Engine | Years |
|---|---|---|---|
| Audi | S5 | 3.0V6 | 2010–2011 |
| Audi | A5 Quattro | 2.0L4 | 2010–2011 |
| Audi | S5 | 4.2V8 | 2008–2011 |
| Audi | A5 | 2.0L4 | 2010–2011 |
| Audi | A5 Quattro | 3.2V6 | 2008–2010 |
| Make | Model | Engine | Years |
|---|---|---|---|
| Audi | Q5 | 3.2V6 | 2009–2010 |
| Make | Model | Engine | Years |
|---|---|---|---|
| Audi | S5 | 3.0V6 | 2017–2017 |
| Audi | A5 Quattro | 2.0L4 | 2017–2017 |
About this Brake Pad Wear Sensor
The BREMBO A00354 brake pad wear sensor warns you, through a dashboard light, when your brake pads are nearly worn out. It sits in the pad and is designed to be worn through, so it usually needs replacing along with the pads.
Frequently asked questions
How does a brake pad wear sensor work?
A wire loop inside the sensor tip sits at the pad's minimum thickness. When the pad wears down, the rotor wears through the loop, breaking the circuit and turning on the warning light.
When do I need to replace the sensor?
Replace it whenever the warning has come on, because the worn loop cannot be reused, and whenever it is damaged during a pad change. Many owners replace it with every pad change.
Do both axles have a sensor?
Many European cars have one sensor on the front axle and one on the rear, usually on one wheel only. Check which axle this sensor is for in the product details and fitment information.
Can I replace the sensor myself?
Yes, it is usually done during a pad change: clip the sensor into the new pad, route the wire away from moving and hot parts, and connect it. The warning light may need a short drive, or on some cars a reset, to clear.
How do I make sure this brake pad wear sensor fits my car?
Compare the part numbers listed on this page with the number on your old part or in your vehicle's parts catalog, and check the fitment information. If you are unsure, contact us with your VIN before ordering.