Skip to content
Brembo Front Cross-Drilled Disc Brake Rotor 288mm for VW Beetle/Golf/Jetta
Brembo Front Cross-Drilled Disc Brake Rotor 288mm for VW Beetle/Golf/Jetta
Brembo Front Cross-Drilled Disc Brake Rotor 288mm for VW Beetle/Golf/Jetta
Brembo Front Cross-Drilled Disc Brake Rotor 288mm for VW Beetle/Golf/Jetta
Brembo Front Cross-Drilled Disc Brake Rotor 288mm for VW Beetle/Golf/Jetta
Brembo Front Cross-Drilled Disc Brake Rotor 288mm for VW Beetle/Golf/Jetta

Brembo Front Cross-Drilled Disc Brake Rotor 288mm for VW Beetle/Golf/Jetta

BREMBO
Availability:
Out of stock
SKU 09.7010.2X
Sold out
$79.39 - $79.39
$79.39
$79.39 - $79.39
$79.39
Rewards
EARN REWARD POINTS
Purchasing this product will earn you 395 points to redeem on future purchases. Check your points.

This Brembo front cross-drilled brake rotor (288mm) is designed for Volkswagen models, offering enhanced stopping power and heat dissipation. Its high-carbon steel construction ensures long-lasting performance under demanding conditions. The drilled pattern reduces brake fade and improves wet braking response.

Key Features & Benefits

  • Cross-Drilled Design: Promotes gas and heat release, reducing brake fade.
  • High Carbon Steel: Provides superior strength and resistance to thermal stress.
  • OE Equivalent Fitment: Matches original dimensions for easy replacement.
  • Rust-Resistant Coating: Helps maintain rotor surface integrity over time.

Vehicle Fitment

Make Model Years Engine
Volkswagen Beetle 2006–2010 2.5L5
Volkswagen Golf 2000–2006 1.8L4
Volkswagen Jetta 1999–2005 2.0L4
Volkswagen Jetta 2000–2005 1.8L4
Volkswagen Golf 2000–2005 2.8V6
Volkswagen Beetle 1999–2005 1.8L4
Volkswagen Jetta 1999–2002 1.9L4
Volkswagen Jetta 2004 1.9L4
Volkswagen Jetta 1999–2003 2.8V6
Volkswagen Beetle 2000–2002 2.0L4
Volkswagen Golf 1999–2000 2.0L4

Technical Specifications

Diameter 288mm
Material High-Carbon Steel
Type Cross-Drilled
Position Front

Installation Notes

OE equivalent fitment allows for a straightforward direct replacement.

About Brembo

Brembo is a world-renowned leader in high-performance braking systems, trusted by top automotive manufacturers and motorsport teams for superior stopping power and reliability.

This part also goes by the following cross reference.

Cross Reference Part Number:

Fits These Vehicles 13 applications
MK4 Golf
Make Model Engine Years
Volkswagen Golf 1.8L4 2000–2006
Volkswagen Golf 2.8V6 2000–2005
Volkswagen Golf 2.0L4 1999–2000
Volkswagen Golf 1.9L4 1999–2000
MK4 Jetta
Make Model Engine Years
Volkswagen Jetta 2.0L4 1999–2005
Volkswagen Jetta 1.8L4 2000–2005
Volkswagen Jetta 1.9L4 1999–2002
Volkswagen Jetta 1.9L4 2004–2004
Volkswagen Jetta 2.8V6 1999–2003
New Beetle
Make Model Engine Years
Volkswagen Beetle 2.5L5 2006–2010
Volkswagen Beetle 1.8L4 1999–2005
Volkswagen Beetle 2.0L4 2000–2002
Volkswagen Beetle 1.9L4 2000–2002
Fits 13 vehicle applications Check vehicle fitment before ordering View fitment

About these Brake Rotors

The BREMBO 09.7010.2X brake rotor is the disc your brake pads clamp against to slow the car. It turns the car's momentum into heat, so its thickness, flatness and surface condition directly affect how smoothly and consistently your brakes stop you.

Frequently asked questions

What do brake rotors do?

When you press the pedal, the caliper squeezes the pads against the spinning rotor. The friction slows the wheel and the rotor absorbs and sheds the heat that braking produces.

What are the signs of worn brake rotors?

A pulsing brake pedal or a shaking steering wheel when braking, deep grooves or scoring, a raised lip at the outer edge, or blue heat spots. Every rotor has a minimum thickness stamped on it; below that it must be replaced.

Should I replace the pads at the same time?

Yes. New pads should be fitted with new rotors so they bed in together, and rotors and pads are always replaced in pairs on the same axle. On many European cars the pad wear sensor should be replaced as well.

Do I need to break in new rotors?

Yes. Follow the pad maker's bedding procedure, usually a series of moderate stops from speed without coming to a full stop, so an even layer of pad material transfers to the rotor. Clean new rotors of any protective coating before fitting if the maker requires it.

How do I make sure this brake rotor fits my car?

Compare the part numbers listed on this page with the number on your old part or in your vehicle's parts catalog, and check the fitment information. If you are unsure, contact us with your VIN before ordering.

Euromotiv is an independent retailer of OEM, Genuine, and aftermarket automotive parts. We are not affiliated with, endorsed by, or authorized by Audi AG, Volkswagen AG, BMW AG, Mercedes-Benz Group AG, Dr. Ing. h.c. F. Porsche AG, MINI, or any other vehicle manufacturer. All trademarks, logos, and brand names are the property of their respective owners and are used solely for identification and compatibility purposes.