VAICO

This engine oil filter housing cap not only caps the oil filter housing, but it also serves as the mounting point for the oil filter. Since thi...

Old rockers need to be replaced when shaft/rocker clearance exceeds specification. It is also recommended to re-machine rocker pads or replace ...

Original VAICO Quality

The air adjustment unit controls the path of the air in the intake manifold, allowing either a shorter or longer runner length. A common source...

The PCV provides a one way exit for gasses built up in the crankcase. Over time, contamination might cause reduced air flow and cracks can occu...

On turbocharged motors the intake piping is put under constant pressure while the engine is running, and has to hold that pressure without leak...

Stop loosing boost pressure from a old worn our or torn hose, replace with this Vaico Intercooler pressure hose.

Q+, original equipment manufacturer quality MADE IN GERMANY

Engine MountEngine mounts are designed to keep your engine and transmission supported and fixed to your vehicles frame or sub-frame without cau...

The valve cover does exactly as the name suggests, keeping the camshaft & valves covered from outside influence while keeping engine oil in...

Right side valve cover with gasket.

The valve cover does exactly as the name suggests, keeping the camshaft & valves covered from outside influence while keeping engine oil in...

A cracked valve cover is a common cause of engine oil leaks. Years of exposure to extreme temperature change degrades the gaskets and causes fa...

Quality aftermarket replacement cylinder head valve cover with built-in PCV valve. Replacement restores smooth idle when the PCV valve has fail...

Left side valve cover with gasket.

Original VAICO Quality

Over time has the cap for your oil filter housing become harder to remove ? Using the wrong tool can round the nut cast into the top of the c...

The oil filter assembly housing contains the oil filter for your vehicle. It allows the engine oil to be strained through the filter and remove...

Are you replacing your mass air flow sensor? Any time you clean/change your MAF it is recommended to replace this gasket * This part is ...

This clip is used to connect the turbo pressure pipe to the intercooler and securing the together to prevent unwanted boost leaks.

Stop loosing boost pressure from a old worn our or torn hose, replace with this Vaico Intercooler pressure hose.

This pressure hose routes directly off the turbocharger outlet to the right side intercooler hard pipe. Replace your leaking pressure hose and ...