{"title":"Storch VE","description":null,"products":[{"product_id":"storch-plj-maf-kit-volkswagen-golf-ii-1-8-gti-plj-04-106-golf","title":"Storch PLJ MAF Kit - Volkswagen Golf II 1.8 \/ GTI (PLJ-04-106-Golf)","description":"\u003cp\u003eStorch PLJ hot-film MAF kit for the \u003cstrong\u003eVolkswagen Golf II 1.8 \/ GTI\u003c\/strong\u003e. Replaces the factory flap-type air flow meter with a modern hot-film sensor for a larger intake cross-section, sharper throttle response and more power across the rev range. Made in Germany by Storch Vehicle Electronics.\u003c\/p\u003e\u003cp\u003eThe PLJ series MAF-sensors differ from the factory-installed air flow meters in that they do not have a throttle valve but instead measure the airflow using the hot film principle. This provides a significantly larger cross-section for the intake air. Combined with the fast and modern evaluation electronics, this leads to increased performance.\u003c\/p\u003e\u003cp\u003eThe engine control unit (ECU) is always provided with accurate values, which prevents any increased strain on the engine components.\u003c\/p\u003e\u003ch3\u003eKey Features \u0026amp; Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eIncreased engine power and torque throughout the entire RPM range\u003c\/li\u003e\n\u003cli\u003eImproved engine operation, especially at low RPMs\u003c\/li\u003e\n\u003cli\u003eSignificantly enhanced throttle response\u003c\/li\u003e\n\u003cli\u003eCompletely wear-free due to electronic measuring principle\u003c\/li\u003e\n\u003cli\u003eReduced fuel consumption and emissions\u003c\/li\u003e\n\u003cli\u003eWeight savings of approximately 1.5 kg compared to the original part\u003c\/li\u003e\n\u003cli\u003eFull compensation of air density (altitude correction)\u003c\/li\u003e\n\u003cli\u003eEasy \"plug and play\" installation (no calibration required)\u003c\/li\u003e\n\u003cli\u003eCO-calibration via calibration screw\u003c\/li\u003e\n\u003cli\u003eReversible installation at any time\u003c\/li\u003e\n\u003cli\u003eSVE air mass meters can be used within the AEC standard temperature range of -40°C to 105°C and are resistant to oil, fuel, and temperature\u003c\/li\u003e\n\u003cli\u003eFully manufactured in Germany\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eImportant Fitment Notes\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eFor Volkswagen Golf II 1.8 \/ GTI.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePlease comply with local regulations regarding the installation of performance-enhancing engine components.\u003c\/p\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003cdiv style=\"overflow-x:auto\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVehicle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eVolkswagen Golf II 1.8 \/ GTI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePLJ-04-106-Golf\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSensor type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eHot-film mass air flow sensor (replaces flap-type air flow meter)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePlug and play, no ECU calibration required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOperating temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e-40 °C to 105 °C (AEC standard)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eReplaces Bosch OEM\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0 280 202 106, 0 280 202 107\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eReplaces VW OEM\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e037 906 301\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eManufacturer\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStorch Vehicle Electronics, Germany\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"STORCH VE","offers":[{"title":"Default Title","offer_id":43845938905149,"sku":"PLJ-04-106-Golf","price":558.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0898\/5024\/files\/106-3.jpg?v=1792349557"},{"product_id":"storch-plj-maf-kit-bmw-3-series-e30-320i-1986-1991-e30-325e-2-7-plj-04-083-3","title":"Storch PLJ MAF Kit - BMW 3 Series E30 320i 1986-1991 \/ E30 325e 2.7 (PLJ-04-083-3)","description":"\u003cp\u003eStorch PLJ hot-film MAF kit for the \u003cstrong\u003eBMW 3 Series E30 320i 1986-1991 \/ E30 325e 2.7\u003c\/strong\u003e. Replaces the factory flap-type air flow meter with a modern hot-film sensor for a larger intake cross-section, sharper throttle response and more power across the rev range. Made in Germany by Storch Vehicle Electronics.\u003c\/p\u003e\u003cp\u003eThe PLJ series MAF-sensors differ from the factory-installed air flow meters in that they do not have a throttle valve but instead measure the airflow using the hot film principle. This provides a significantly larger cross-section for the intake air. Combined with the fast and modern evaluation electronics, this leads to increased performance.\u003c\/p\u003e\u003cp\u003eThe engine control unit (ECU) is always provided with accurate values, which prevents any increased strain on the engine components.\u003c\/p\u003e\u003ch3\u003eKey Features \u0026amp; Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eIncreased engine power and torque throughout the entire RPM range\u003c\/li\u003e\n\u003cli\u003eImproved engine operation, especially at low RPMs\u003c\/li\u003e\n\u003cli\u003eSignificantly enhanced throttle response\u003c\/li\u003e\n\u003cli\u003eCompletely wear-free due to electronic measuring principle\u003c\/li\u003e\n\u003cli\u003eReduced fuel consumption and emissions\u003c\/li\u003e\n\u003cli\u003eWeight savings of approximately 1.5 kg compared to the original part\u003c\/li\u003e\n\u003cli\u003eFull compensation of air density (altitude correction)\u003c\/li\u003e\n\u003cli\u003eEasy \"plug and play\" installation (no calibration required)\u003c\/li\u003e\n\u003cli\u003eCO-calibration via calibration screw\u003c\/li\u003e\n\u003cli\u003eReversible installation at any time\u003c\/li\u003e\n\u003cli\u003eSVE air mass meters can be used within the AEC standard temperature range of -40°C to 105°C and are resistant to oil, fuel, and temperature\u003c\/li\u003e\n\u003cli\u003eFully manufactured in Germany\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eImportant Fitment Notes\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eFor BMW 3 Series E30 320i 1986-1991 \/ E30 325e 2.7.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePlease comply with local regulations regarding the installation of performance-enhancing engine components.\u003c\/p\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003cdiv style=\"overflow-x:auto\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVehicle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBMW 3 Series E30 320i 1986-1991 \/ E30 325e 2.7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePLJ-04-083-3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSensor type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eHot-film mass air flow sensor (replaces flap-type air flow meter)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePlug and play, no ECU calibration required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOperating temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e-40 °C to 105 °C (AEC standard)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eReplaces Bosch OEM\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0 280 202 083\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eReplaces BMW OEM\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e13 62 1 710 539, 13 62 7 547 978\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eManufacturer\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStorch Vehicle Electronics, Germany\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"STORCH VE","offers":[{"title":"Default Title","offer_id":43845939331133,"sku":"PLJ-04-083-3","price":653.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0898\/5024\/files\/083-3.jpg?v=1792349659"},{"product_id":"storch-plj-maf-kit-bmw-3-series-e30-320i-1982-1987-323i-1982-1986-plj-04-090","title":"Storch PLJ MAF Kit - BMW 3 Series E30 320i 1982-1987 \u0026 323i 1982-1986 (PLJ-04-090)","description":"\u003cp\u003eStorch PLJ hot-film MAF kit for the \u003cstrong\u003eBMW 3 Series E30 320i 1982-1987 \u0026amp; 323i 1982-1986\u003c\/strong\u003e. Replaces the factory flap-type air flow meter with a modern hot-film sensor for a larger intake cross-section, sharper throttle response and more power across the rev range. Made in Germany by Storch Vehicle Electronics.\u003c\/p\u003e\u003cp\u003eThe PLJ series MAF-sensors differ from the factory-installed air flow meters in that they do not have a throttle valve but instead measure the airflow using the hot film principle. This provides a significantly larger cross-section for the intake air. Combined with the fast and modern evaluation electronics, this leads to increased performance.\u003c\/p\u003e\u003cp\u003eThe engine control unit (ECU) is always provided with accurate values, which prevents any increased strain on the engine components.\u003c\/p\u003e\u003ch3\u003eKey Features \u0026amp; Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eIncreased engine power and torque throughout the entire RPM range\u003c\/li\u003e\n\u003cli\u003eImproved engine operation, especially at low RPMs\u003c\/li\u003e\n\u003cli\u003eSignificantly enhanced throttle response\u003c\/li\u003e\n\u003cli\u003eCompletely wear-free due to electronic measuring principle\u003c\/li\u003e\n\u003cli\u003eReduced fuel consumption and emissions\u003c\/li\u003e\n\u003cli\u003eWeight savings of approximately 1.5 kg compared to the original part\u003c\/li\u003e\n\u003cli\u003eFull compensation of air density (altitude correction)\u003c\/li\u003e\n\u003cli\u003eEasy \"plug and play\" installation (no calibration required)\u003c\/li\u003e\n\u003cli\u003eCO-calibration via calibration screw\u003c\/li\u003e\n\u003cli\u003eReversible installation at any time\u003c\/li\u003e\n\u003cli\u003eSVE air mass meters can be used within the AEC standard temperature range of -40°C to 105°C and are resistant to oil, fuel, and temperature\u003c\/li\u003e\n\u003cli\u003eFully manufactured in Germany\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eImportant Fitment Notes\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eFor BMW 3 Series E30 320i 1982-1987 \u0026amp; 323i 1982-1986.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePlease comply with local regulations regarding the installation of performance-enhancing engine components.\u003c\/p\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003cdiv style=\"overflow-x:auto\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVehicle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBMW 3 Series E30 320i 1982-1987 \u0026amp; 323i 1982-1986\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePLJ-04-090\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSensor type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eHot-film mass air flow sensor (replaces flap-type air flow meter)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePlug and play, no ECU calibration required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOperating temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e-40 °C to 105 °C (AEC standard)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eReplaces Bosch OEM\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0 280 202 090\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eReplaces BMW OEM\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e13 62 1 710 546\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eManufacturer\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStorch Vehicle Electronics, Germany\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"STORCH VE","offers":[{"title":"Default Title","offer_id":43845939363901,"sku":"PLJ-04-090","price":653.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0898\/5024\/files\/090-3.jpg?v=1792349660"},{"product_id":"storch-plj-maf-kit-bmw-3-series-e30-325i-plj-04-082-3","title":"Storch PLJ MAF Kit - BMW 3 Series E30 325i (PLJ-04-082-3)","description":"\u003cp\u003eStorch PLJ hot-film MAF kit for the \u003cstrong\u003eBMW 3 Series E30 325i\u003c\/strong\u003e. Replaces the factory flap-type air flow meter with a modern hot-film sensor for a larger intake cross-section, sharper throttle response and more power across the rev range. Made in Germany by Storch Vehicle Electronics.\u003c\/p\u003e\u003cp\u003eThe PLJ series MAF-sensors differ from the factory-installed air flow meters in that they do not have a throttle valve but instead measure the airflow using the hot film principle. This provides a significantly larger cross-section for the intake air. Combined with the fast and modern evaluation electronics, this leads to increased performance.\u003c\/p\u003e\u003cp\u003eThe engine control unit (ECU) is always provided with accurate values, which prevents any increased strain on the engine components.\u003c\/p\u003e\u003ch3\u003eKey Features \u0026amp; Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eIncreased engine power and torque throughout the entire RPM range\u003c\/li\u003e\n\u003cli\u003eImproved engine operation, especially at low RPMs\u003c\/li\u003e\n\u003cli\u003eSignificantly enhanced throttle response\u003c\/li\u003e\n\u003cli\u003eCompletely wear-free due to electronic measuring principle\u003c\/li\u003e\n\u003cli\u003eReduced fuel consumption and emissions\u003c\/li\u003e\n\u003cli\u003eWeight savings of approximately 1.5 kg compared to the original part\u003c\/li\u003e\n\u003cli\u003eFull compensation of air density (altitude correction)\u003c\/li\u003e\n\u003cli\u003eEasy \"plug and play\" installation (no calibration required)\u003c\/li\u003e\n\u003cli\u003eCO-calibration via calibration screw\u003c\/li\u003e\n\u003cli\u003eReversible installation at any time\u003c\/li\u003e\n\u003cli\u003eSVE air mass meters can be used within the AEC standard temperature range of -40°C to 105°C and are resistant to oil, fuel, and temperature\u003c\/li\u003e\n\u003cli\u003eFully manufactured in Germany\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eImportant Fitment Notes\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eFor BMW 3 Series E30 325i.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePlease comply with local regulations regarding the installation of performance-enhancing engine components.\u003c\/p\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003cdiv style=\"overflow-x:auto\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVehicle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBMW 3 Series E30 325i\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePLJ-04-082-3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSensor type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eHot-film mass air flow sensor (replaces flap-type air flow meter)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePlug and play, no ECU calibration required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOperating temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e-40 °C to 105 °C (AEC standard)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eReplaces Bosch OEM\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0 280 202 082\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eReplaces BMW OEM\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e13 62 1 286 615, 13 62 7 547 977\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eManufacturer\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStorch Vehicle Electronics, Germany\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"STORCH VE","offers":[{"title":"Default Title","offer_id":43845939396669,"sku":"PLJ-04-082-3","price":653.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0898\/5024\/files\/082-3.jpg?v=1792349660"},{"product_id":"storch-plj-maf-kit-bmw-5-series-e28-520i-1985-1987-e28-525e-e34-520i-1987-1990-plj-04-083-5","title":"Storch PLJ MAF Kit - BMW 5 Series E28 520i 1985-1987 \/ E28 525e \/ E34 520i 1987-1990 (PLJ-04-083-5)","description":"\u003cp\u003eStorch PLJ hot-film MAF kit for the \u003cstrong\u003eBMW 5 Series E28 520i 1985-1987 \/ E28 525e \/ E34 520i 1987-1990\u003c\/strong\u003e. Replaces the factory flap-type air flow meter with a modern hot-film sensor for a larger intake cross-section, sharper throttle response and more power across the rev range. Made in Germany by Storch Vehicle Electronics.\u003c\/p\u003e\u003cp\u003eThe PLJ series MAF-sensors differ from the factory-installed air flow meters in that they do not have a throttle valve but instead measure the airflow using the hot film principle. This provides a significantly larger cross-section for the intake air. Combined with the fast and modern evaluation electronics, this leads to increased performance.\u003c\/p\u003e\u003cp\u003eThe engine control unit (ECU) is always provided with accurate values, which prevents any increased strain on the engine components.\u003c\/p\u003e\u003ch3\u003eKey Features \u0026amp; Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eIncreased engine power and torque throughout the entire RPM range\u003c\/li\u003e\n\u003cli\u003eImproved engine operation, especially at low RPMs\u003c\/li\u003e\n\u003cli\u003eSignificantly enhanced throttle response\u003c\/li\u003e\n\u003cli\u003eCompletely wear-free due to electronic measuring principle\u003c\/li\u003e\n\u003cli\u003eReduced fuel consumption and emissions\u003c\/li\u003e\n\u003cli\u003eWeight savings of approximately 1.5 kg compared to the original part\u003c\/li\u003e\n\u003cli\u003eFull compensation of air density (altitude correction)\u003c\/li\u003e\n\u003cli\u003eEasy \"plug and play\" installation (no calibration required)\u003c\/li\u003e\n\u003cli\u003eCO-calibration via calibration screw\u003c\/li\u003e\n\u003cli\u003eReversible installation at any time\u003c\/li\u003e\n\u003cli\u003eSVE air mass meters can be used within the AEC standard temperature range of -40°C to 105°C and are resistant to oil, fuel, and temperature\u003c\/li\u003e\n\u003cli\u003eFully manufactured in Germany\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eImportant Fitment Notes\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eFor BMW 5 Series E28 520i 1985-1987 \/ E28 525e \/ E34 520i 1987-1990.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePlease comply with local regulations regarding the installation of performance-enhancing engine components.\u003c\/p\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003cdiv style=\"overflow-x:auto\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVehicle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBMW 5 Series E28 520i 1985-1987 \/ E28 525e \/ E34 520i 1987-1990\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePLJ-04-083-5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSensor type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eHot-film mass air flow sensor (replaces flap-type air flow meter)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePlug and play, no ECU calibration required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOperating temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e-40 °C to 105 °C (AEC standard)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eReplaces Bosch OEM\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0 280 202 083\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eReplaces BMW OEM\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e13 62 1 710 539, 13 62 7 547 978\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eManufacturer\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStorch Vehicle Electronics, Germany\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"STORCH VE","offers":[{"title":"Default Title","offer_id":43845939724349,"sku":"PLJ-04-083-5","price":653.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0898\/5024\/files\/083-3_6647d58b-3dbe-44c1-ab2a-4678e37438f8.jpg?v=1792349661"},{"product_id":"storch-plj-maf-kit-bmw-5-series-e34-525i-1988-1990-plj-04-082-5","title":"Storch PLJ MAF Kit - BMW 5 Series E34 525i 1988-1990 (PLJ-04-082-5)","description":"\u003cp\u003eStorch PLJ hot-film MAF kit for the \u003cstrong\u003eBMW 5 Series E34 525i 1988-1990\u003c\/strong\u003e. Replaces the factory flap-type air flow meter with a modern hot-film sensor for a larger intake cross-section, sharper throttle response and more power across the rev range. Made in Germany by Storch Vehicle Electronics.\u003c\/p\u003e\u003cp\u003eThe PLJ series MAF-sensors differ from the factory-installed air flow meters in that they do not have a throttle valve but instead measure the airflow using the hot film principle. This provides a significantly larger cross-section for the intake air. Combined with the fast and modern evaluation electronics, this leads to increased performance.\u003c\/p\u003e\u003cp\u003eThe engine control unit (ECU) is always provided with accurate values, which prevents any increased strain on the engine components.\u003c\/p\u003e\u003ch3\u003eKey Features \u0026amp; Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eIncreased engine power and torque throughout the entire RPM range\u003c\/li\u003e\n\u003cli\u003eImproved engine operation, especially at low RPMs\u003c\/li\u003e\n\u003cli\u003eSignificantly enhanced throttle response\u003c\/li\u003e\n\u003cli\u003eCompletely wear-free due to electronic measuring principle\u003c\/li\u003e\n\u003cli\u003eReduced fuel consumption and emissions\u003c\/li\u003e\n\u003cli\u003eWeight savings of approximately 1.5 kg compared to the original part\u003c\/li\u003e\n\u003cli\u003eFull compensation of air density (altitude correction)\u003c\/li\u003e\n\u003cli\u003eEasy \"plug and play\" installation (no calibration required)\u003c\/li\u003e\n\u003cli\u003eCO-calibration via calibration screw\u003c\/li\u003e\n\u003cli\u003eReversible installation at any time\u003c\/li\u003e\n\u003cli\u003eSVE air mass meters can be used within the AEC standard temperature range of -40°C to 105°C and are resistant to oil, fuel, and temperature\u003c\/li\u003e\n\u003cli\u003eFully manufactured in Germany\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eImportant Fitment Notes\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eFor BMW 5 Series E34 525i 1988-1990.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePlease comply with local regulations regarding the installation of performance-enhancing engine components.\u003c\/p\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003cdiv style=\"overflow-x:auto\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVehicle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBMW 5 Series E34 525i 1988-1990\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePLJ-04-082-5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSensor type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eHot-film mass air flow sensor (replaces flap-type air flow meter)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePlug and play, no ECU calibration required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOperating temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e-40 °C to 105 °C (AEC standard)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eReplaces Bosch OEM\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0 280 202 082\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eReplaces BMW OEM\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e13 62 1 286 615, 13 62 7 547 977\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eManufacturer\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStorch Vehicle Electronics, Germany\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"STORCH VE","offers":[{"title":"Default Title","offer_id":43845939757117,"sku":"PLJ-04-082-5","price":653.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0898\/5024\/files\/082-3_15dd6bb7-8599-4062-9373-52fbfdd40871.jpg?v=1792349662"},{"product_id":"storch-plj-maf-kit-bmw-z1-2-5-1988-1991-plj-04-082-z","title":"Storch PLJ MAF Kit - BMW Z1 2.5 1988-1991 (PLJ-04-082-Z)","description":"\u003cp\u003eStorch PLJ hot-film MAF kit for the \u003cstrong\u003eBMW Z1 2.5 1988-1991\u003c\/strong\u003e. Replaces the factory flap-type air flow meter with a modern hot-film sensor for a larger intake cross-section, sharper throttle response and more power across the rev range. Made in Germany by Storch Vehicle Electronics.\u003c\/p\u003e\u003cp\u003eThe PLJ series MAF-sensors differ from the factory-installed air flow meters in that they do not have a throttle valve but instead measure the airflow using the hot film principle. This provides a significantly larger cross-section for the intake air. Combined with the fast and modern evaluation electronics, this leads to increased performance.\u003c\/p\u003e\u003cp\u003eThe engine control unit (ECU) is always provided with accurate values, which prevents any increased strain on the engine components.\u003c\/p\u003e\u003ch3\u003eKey Features \u0026amp; Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eIncreased engine power and torque throughout the entire RPM range\u003c\/li\u003e\n\u003cli\u003eImproved engine operation, especially at low RPMs\u003c\/li\u003e\n\u003cli\u003eSignificantly enhanced throttle response\u003c\/li\u003e\n\u003cli\u003eCompletely wear-free due to electronic measuring principle\u003c\/li\u003e\n\u003cli\u003eReduced fuel consumption and emissions\u003c\/li\u003e\n\u003cli\u003eWeight savings of approximately 1.5 kg compared to the original part\u003c\/li\u003e\n\u003cli\u003eFull compensation of air density (altitude correction)\u003c\/li\u003e\n\u003cli\u003eEasy \"plug and play\" installation (no calibration required)\u003c\/li\u003e\n\u003cli\u003eCO-calibration via calibration screw\u003c\/li\u003e\n\u003cli\u003eReversible installation at any time\u003c\/li\u003e\n\u003cli\u003eSVE air mass meters can be used within the AEC standard temperature range of -40°C to 105°C and are resistant to oil, fuel, and temperature\u003c\/li\u003e\n\u003cli\u003eFully manufactured in Germany\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eImportant Fitment Notes\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eFor BMW Z1 2.5 1988-1991.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePlease comply with local regulations regarding the installation of performance-enhancing engine components.\u003c\/p\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003cdiv style=\"overflow-x:auto\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVehicle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBMW Z1 2.5 1988-1991\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePLJ-04-082-Z\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSensor type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eHot-film mass air flow sensor (replaces flap-type air flow meter)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePlug and play, no ECU calibration required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOperating temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e-40 °C to 105 °C (AEC standard)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eReplaces Bosch OEM\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0 280 202 082\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eReplaces BMW OEM\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e13 62 1 286 615, 13 62 7 547 977\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eManufacturer\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStorch Vehicle Electronics, Germany\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"STORCH VE","offers":[{"title":"Default Title","offer_id":43845939920957,"sku":"PLJ-04-082-Z","price":653.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0898\/5024\/files\/082-3_9cd83bf9-4628-48ea-a018-5bb028fe479e.jpg?v=1792349753"},{"product_id":"storch-plj-maf-kit-porsche-911-3-2-964-g-model-plj-04-023","title":"Storch PLJ MAF Kit - Porsche 911 3.2 (964 \/ G-Model) (PLJ-04-023)","description":"\u003cp\u003eStorch PLJ hot-film MAF kit for the \u003cstrong\u003ePorsche 911 3.2 (964 \/ G-Model)\u003c\/strong\u003e. Replaces the factory flap-type air flow meter with a modern hot-film sensor for a larger intake cross-section, sharper throttle response and more power across the rev range. Made in Germany by Storch Vehicle Electronics.\u003c\/p\u003e\u003cp\u003eThe PLJ series MAF-sensors differ from the factory-installed air flow meters in that they do not have a throttle valve but instead measure the airflow using the hot film principle. This provides a significantly larger cross-section for the intake air. Combined with the fast and modern evaluation electronics, this leads to increased performance.\u003c\/p\u003e\u003cp\u003eThe engine control unit (ECU) is always provided with accurate values, which prevents any increased strain on the engine components.\u003c\/p\u003e\u003ch3\u003eKey Features \u0026amp; Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eIncreased engine power and torque throughout the entire RPM range\u003c\/li\u003e\n\u003cli\u003eImproved engine operation, especially at low RPMs\u003c\/li\u003e\n\u003cli\u003eSignificantly enhanced throttle response\u003c\/li\u003e\n\u003cli\u003eCompletely wear-free due to electronic measuring principle\u003c\/li\u003e\n\u003cli\u003eReduced fuel consumption and emissions\u003c\/li\u003e\n\u003cli\u003eWeight savings of approximately 2.5 kg compared to the original part\u003c\/li\u003e\n\u003cli\u003eFull compensation of air density (altitude correction)\u003c\/li\u003e\n\u003cli\u003eEasy \"plug and play\" installation (no calibration required)\u003c\/li\u003e\n\u003cli\u003eCO-calibration via calibration screw\u003c\/li\u003e\n\u003cli\u003eReversible installation at any time\u003c\/li\u003e\n\u003cli\u003eSVE air mass meters can be used within the AEC standard temperature range of -40°C to 105°C and are resistant to oil, fuel, and temperature\u003c\/li\u003e\n\u003cli\u003eFully manufactured in Germany\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eImportant Fitment Notes\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eFor Porsche 911 3.2 (964 \/ G-Model).\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePlease comply with local regulations regarding the installation of performance-enhancing engine components.\u003c\/p\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003cdiv style=\"overflow-x:auto\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVehicle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePorsche 911 3.2 (964 \/ G-Model)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePLJ-04-023\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSensor type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eHot-film mass air flow sensor (replaces flap-type air flow meter)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePlug and play, no ECU calibration required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOperating temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e-40 °C to 105 °C (AEC standard)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eReplaces Bosch OEM\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0 280 203 023\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eReplaces Porsche OEM\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e930 606 123 00, 930 606 123 X, 964 606 050 00, 964 606 050 X\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eManufacturer\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStorch Vehicle Electronics, Germany\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"STORCH VE","offers":[{"title":"Default Title","offer_id":43845939953725,"sku":"PLJ-04-023","price":899.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0898\/5024\/files\/023-3.jpg?v=1792349754"},{"product_id":"storch-plj-maf-kit-porsche-944-s-944-s2-plj-04-029","title":"Storch PLJ MAF Kit - Porsche 944 S \/ 944 S2 (PLJ-04-029)","description":"\u003cp\u003eStorch PLJ hot-film MAF kit for the \u003cstrong\u003ePorsche 944 S \/ 944 S2\u003c\/strong\u003e. Replaces the factory flap-type air flow meter with a modern hot-film sensor for a larger intake cross-section, sharper throttle response and more power across the rev range. Made in Germany by Storch Vehicle Electronics.\u003c\/p\u003e\u003cp\u003eThe PLJ series MAF-sensors differ from the factory-installed air flow meters in that they do not have a throttle valve but instead measure the airflow using the hot film principle. This provides a significantly larger cross-section for the intake air. Combined with the fast and modern evaluation electronics, this leads to increased performance.\u003c\/p\u003e\u003cp\u003eThe engine control unit (ECU) is always provided with accurate values, which prevents any increased strain on the engine components.\u003c\/p\u003e\u003ch3\u003eKey Features \u0026amp; Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eIncreased engine power and torque throughout the entire RPM range\u003c\/li\u003e\n\u003cli\u003eImproved engine operation, especially at low RPMs\u003c\/li\u003e\n\u003cli\u003eSignificantly enhanced throttle response\u003c\/li\u003e\n\u003cli\u003eCompletely wear-free due to electronic measuring principle\u003c\/li\u003e\n\u003cli\u003eReduced fuel consumption and emissions\u003c\/li\u003e\n\u003cli\u003eWeight savings of approximately 2.5 kg compared to the original part\u003c\/li\u003e\n\u003cli\u003eFull compensation of air density (altitude correction)\u003c\/li\u003e\n\u003cli\u003eEasy \"plug and play\" installation (no calibration required)\u003c\/li\u003e\n\u003cli\u003eCO-calibration via calibration screw\u003c\/li\u003e\n\u003cli\u003eReversible installation at any time\u003c\/li\u003e\n\u003cli\u003eSVE air mass meters can be used within the AEC standard temperature range of -40°C to 105°C and are resistant to oil, fuel, and temperature\u003c\/li\u003e\n\u003cli\u003eFully manufactured in Germany\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eImportant Fitment Notes\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eFor Porsche 944 S \/ 944 S2.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePlease comply with local regulations regarding the installation of performance-enhancing engine components.\u003c\/p\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003cdiv style=\"overflow-x:auto\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVehicle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePorsche 944 S \/ 944 S2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePLJ-04-029\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSensor type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eHot-film mass air flow sensor (replaces flap-type air flow meter)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePlug and play, no ECU calibration required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOperating temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e-40 °C to 105 °C (AEC standard)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eReplaces Bosch OEM\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0 280 203 029\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eReplaces Porsche OEM\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e944 606 124 00, 951 606 124 X\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eManufacturer\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStorch Vehicle Electronics, Germany\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"STORCH VE","offers":[{"title":"Default Title","offer_id":43845939986493,"sku":"PLJ-04-029","price":827.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0898\/5024\/files\/029-3.jpg?v=1792349755"},{"product_id":"storch-plj-maf-kit-porsche-944-turbo-951-plj-04-026","title":"Storch PLJ MAF Kit - Porsche 944 turbo (951) (PLJ-04-026)","description":"\u003cp\u003eStorch PLJ hot-film MAF kit for the \u003cstrong\u003ePorsche 944 turbo (951)\u003c\/strong\u003e. Replaces the factory flap-type air flow meter with a modern hot-film sensor for a larger intake cross-section, sharper throttle response and more power across the rev range. Made in Germany by Storch Vehicle Electronics.\u003c\/p\u003e\u003cp\u003eThe PLJ series MAF-sensors differ from the factory-installed air flow meters in that they do not have a throttle valve but instead measure the airflow using the hot film principle. This provides a significantly larger cross-section for the intake air. Combined with the fast and modern evaluation electronics, this leads to increased performance.\u003c\/p\u003e\u003cp\u003eThe engine control unit (ECU) is always provided with accurate values, which prevents any increased strain on the engine components.\u003c\/p\u003e\u003ch3\u003eKey Features \u0026amp; Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eIncreased engine power and torque throughout the entire RPM range\u003c\/li\u003e\n\u003cli\u003eImproved engine operation, especially at low RPMs\u003c\/li\u003e\n\u003cli\u003eSignificantly enhanced throttle response\u003c\/li\u003e\n\u003cli\u003eCompletely wear-free due to electronic measuring principle\u003c\/li\u003e\n\u003cli\u003eReduced fuel consumption and emissions\u003c\/li\u003e\n\u003cli\u003eWeight savings of approximately 2.5 kg compared to the original part\u003c\/li\u003e\n\u003cli\u003eFull compensation of air density (altitude correction)\u003c\/li\u003e\n\u003cli\u003eEasy \"plug and play\" installation (no calibration required)\u003c\/li\u003e\n\u003cli\u003eCO-calibration via calibration screw\u003c\/li\u003e\n\u003cli\u003eReversible installation at any time\u003c\/li\u003e\n\u003cli\u003eSVE air mass meters can be used within the AEC standard temperature range of -40°C to 105°C and are resistant to oil, fuel, and temperature\u003c\/li\u003e\n\u003cli\u003eFully manufactured in Germany\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eImportant Fitment Notes\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eFor Porsche 944 turbo (951).\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePlease comply with local regulations regarding the installation of performance-enhancing engine components.\u003c\/p\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003cdiv style=\"overflow-x:auto\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVehicle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePorsche 944 turbo (951)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePLJ-04-026\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSensor type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eHot-film mass air flow sensor (replaces flap-type air flow meter)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePlug and play, no ECU calibration required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOperating temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e-40 °C to 105 °C (AEC standard)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eReplaces Bosch OEM\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0 280 203 026\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eReplaces Porsche OEM\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e951 606 121 01, 951 606 121 AX, 60513882, 6060217, 60602177\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eManufacturer\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStorch Vehicle Electronics, Germany\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"STORCH VE","offers":[{"title":"Default Title","offer_id":43845940019261,"sku":"PLJ-04-026","price":827.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0898\/5024\/files\/026-3.jpg?v=1792349756"},{"product_id":"storch-plj-maf-kit-porsche-924s-plj-04-064-924","title":"Storch PLJ MAF Kit - Porsche 924S (PLJ-04-064-924)","description":"\u003cp\u003eStorch PLJ hot-film MAF kit for the \u003cstrong\u003ePorsche 924S\u003c\/strong\u003e. Replaces the factory flap-type air flow meter with a modern hot-film sensor for a larger intake cross-section, sharper throttle response and more power across the rev range. Made in Germany by Storch Vehicle Electronics.\u003c\/p\u003e\u003cp\u003eThe PLJ series MAF-sensors differ from the factory-installed air flow meters in that they do not have a throttle valve but instead measure the airflow using the hot film principle. This provides a significantly larger cross-section for the intake air. Combined with the fast and modern evaluation electronics, this leads to increased performance.\u003c\/p\u003e\u003cp\u003eThe engine control unit (ECU) is always provided with accurate values, which prevents any increased strain on the engine components.\u003c\/p\u003e\u003ch3\u003eKey Features \u0026amp; Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eIncreased engine power and torque throughout the entire RPM range\u003c\/li\u003e\n\u003cli\u003eImproved engine operation, especially at low RPMs\u003c\/li\u003e\n\u003cli\u003eSignificantly enhanced throttle response\u003c\/li\u003e\n\u003cli\u003eCompletely wear-free due to electronic measuring principle\u003c\/li\u003e\n\u003cli\u003eReduced fuel consumption and emissions\u003c\/li\u003e\n\u003cli\u003eWeight savings of approximately 1.5 kg compared to the original part\u003c\/li\u003e\n\u003cli\u003eFull compensation of air density (altitude correction)\u003c\/li\u003e\n\u003cli\u003eEasy \"plug and play\" installation (no calibration required)\u003c\/li\u003e\n\u003cli\u003eCO-calibration via calibration screw\u003c\/li\u003e\n\u003cli\u003eReversible installation at any time\u003c\/li\u003e\n\u003cli\u003eSVE air mass meters can be used within the AEC standard temperature range of -40°C to 105°C and are resistant to oil, fuel, and temperature\u003c\/li\u003e\n\u003cli\u003eFully manufactured in Germany\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eImportant Fitment Notes\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eFor Porsche 924S.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePlease comply with local regulations regarding the installation of performance-enhancing engine components.\u003c\/p\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003cdiv style=\"overflow-x:auto\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVehicle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePorsche 924S\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePLJ-04-064-924\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSensor type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eHot-film mass air flow sensor (replaces flap-type air flow meter)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePlug and play, no ECU calibration required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOperating temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e-40 °C to 105 °C (AEC standard)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eReplaces Bosch OEM\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0 280 202 064\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eReplaces Porsche OEM\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e944 606 121 01, 944 606 121 AX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eManufacturer\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStorch Vehicle Electronics, Germany\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"STORCH VE","offers":[{"title":"Default Title","offer_id":43845940052029,"sku":"PLJ-04-064-924","price":718.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0898\/5024\/files\/064-3.jpg?v=1792349757"},{"product_id":"storch-plj-maf-kit-porsche-944-1985-plj-04-064-944","title":"Storch PLJ MAF Kit - Porsche 944 1985+ (PLJ-04-064-944)","description":"\u003cp\u003eStorch PLJ hot-film MAF kit for the \u003cstrong\u003ePorsche 944 1985+\u003c\/strong\u003e. Replaces the factory flap-type air flow meter with a modern hot-film sensor for a larger intake cross-section, sharper throttle response and more power across the rev range. Made in Germany by Storch Vehicle Electronics.\u003c\/p\u003e\u003cp\u003eThe PLJ series MAF-sensors differ from the factory-installed air flow meters in that they do not have a throttle valve but instead measure the airflow using the hot film principle. This provides a significantly larger cross-section for the intake air. Combined with the fast and modern evaluation electronics, this leads to increased performance.\u003c\/p\u003e\u003cp\u003eThe engine control unit (ECU) is always provided with accurate values, which prevents any increased strain on the engine components.\u003c\/p\u003e\u003ch3\u003eKey Features \u0026amp; Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eIncreased engine power and torque throughout the entire RPM range\u003c\/li\u003e\n\u003cli\u003eImproved engine operation, especially at low RPMs\u003c\/li\u003e\n\u003cli\u003eSignificantly enhanced throttle response\u003c\/li\u003e\n\u003cli\u003eCompletely wear-free due to electronic measuring principle\u003c\/li\u003e\n\u003cli\u003eReduced fuel consumption and emissions\u003c\/li\u003e\n\u003cli\u003eWeight savings of approximately 1.5 kg compared to the original part\u003c\/li\u003e\n\u003cli\u003eFull compensation of air density (altitude correction)\u003c\/li\u003e\n\u003cli\u003eEasy \"plug and play\" installation (no calibration required)\u003c\/li\u003e\n\u003cli\u003eCO-calibration via calibration screw\u003c\/li\u003e\n\u003cli\u003eReversible installation at any time\u003c\/li\u003e\n\u003cli\u003eSVE air mass meters can be used within the AEC standard temperature range of -40°C to 105°C and are resistant to oil, fuel, and temperature\u003c\/li\u003e\n\u003cli\u003eFully manufactured in Germany\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eImportant Fitment Notes\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eFor Porsche 944 1985+.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePlease comply with local regulations regarding the installation of performance-enhancing engine components.\u003c\/p\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003cdiv style=\"overflow-x:auto\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVehicle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePorsche 944 1985+\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePLJ-04-064-944\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSensor type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eHot-film mass air flow sensor (replaces flap-type air flow meter)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePlug and play, no ECU calibration required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOperating temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e-40 °C to 105 °C (AEC standard)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eReplaces Bosch OEM\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0 280 202 064\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eReplaces Porsche OEM\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e944 606 121 01, 944 606 121 AX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eManufacturer\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStorch Vehicle Electronics, Germany\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"STORCH VE","offers":[{"title":"Default Title","offer_id":43845940478013,"sku":"PLJ-04-064-944","price":718.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0898\/5024\/files\/064-3_60b75efe-a051-464d-b6f4-a8f7a5a98c4c.jpg?v=1792349918"},{"product_id":"storch-plj-maf-kit-porsche-944-up-to-1984-plj-04-028","title":"Storch PLJ MAF Kit - Porsche 944 up to 1984 (PLJ-04-028)","description":"\u003cp\u003eStorch PLJ hot-film MAF kit for the \u003cstrong\u003ePorsche 944 up to 1984\u003c\/strong\u003e. Replaces the factory flap-type air flow meter with a modern hot-film sensor for a larger intake cross-section, sharper throttle response and more power across the rev range. Made in Germany by Storch Vehicle Electronics.\u003c\/p\u003e\u003cp\u003eThe PLJ series MAF-sensors differ from the factory-installed air flow meters in that they do not have a throttle valve but instead measure the airflow using the hot film principle. This provides a significantly larger cross-section for the intake air. Combined with the fast and modern evaluation electronics, this leads to increased performance.\u003c\/p\u003e\u003cp\u003eThe engine control unit (ECU) is always provided with accurate values, which prevents any increased strain on the engine components.\u003c\/p\u003e\u003ch3\u003eKey Features \u0026amp; Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eIncreased engine power and torque throughout the entire RPM range\u003c\/li\u003e\n\u003cli\u003eImproved engine operation, especially at low RPMs\u003c\/li\u003e\n\u003cli\u003eSignificantly enhanced throttle response\u003c\/li\u003e\n\u003cli\u003eCompletely wear-free due to electronic measuring principle\u003c\/li\u003e\n\u003cli\u003eReduced fuel consumption and emissions\u003c\/li\u003e\n\u003cli\u003eWeight savings of approximately 1.5 kg compared to the original part\u003c\/li\u003e\n\u003cli\u003eFull compensation of air density (altitude correction)\u003c\/li\u003e\n\u003cli\u003eEasy \"plug and play\" installation (no calibration required)\u003c\/li\u003e\n\u003cli\u003eCO-calibration via calibration screw\u003c\/li\u003e\n\u003cli\u003eReversible installation at any time\u003c\/li\u003e\n\u003cli\u003eSVE air mass meters can be used within the AEC standard temperature range of -40°C to 105°C and are resistant to oil, fuel, and temperature\u003c\/li\u003e\n\u003cli\u003eFully manufactured in Germany\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eImportant Fitment Notes\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eFor Porsche 944 up to 1984.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePlease comply with local regulations regarding the installation of performance-enhancing engine components.\u003c\/p\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003cdiv style=\"overflow-x:auto\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVehicle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePorsche 944 up to 1984\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePLJ-04-028\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSensor type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eHot-film mass air flow sensor (replaces flap-type air flow meter)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePlug and play, no ECU calibration required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOperating temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e-40 °C to 105 °C (AEC standard)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eReplaces Bosch OEM\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0 280 202 028\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eReplaces Porsche OEM\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e944 606 121 00, 944 606 121 X\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eManufacturer\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStorch Vehicle Electronics, Germany\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"STORCH VE","offers":[{"title":"Default Title","offer_id":43845940510781,"sku":"PLJ-04-028","price":718.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0898\/5024\/files\/028-3.jpg?v=1792349918"},{"product_id":"storch-plj-maf-kit-volkswagen-jetta-1-8-1988-1992-plj-04-106-jetta","title":"Storch PLJ MAF Kit - Volkswagen Jetta 1.8 1988-1992 (PLJ-04-106-Jetta)","description":"\u003cp\u003eStorch PLJ hot-film MAF kit for the \u003cstrong\u003eVolkswagen Jetta 1.8 1988-1992\u003c\/strong\u003e. Replaces the factory flap-type air flow meter with a modern hot-film sensor for a larger intake cross-section, sharper throttle response and more power across the rev range. Made in Germany by Storch Vehicle Electronics.\u003c\/p\u003e\u003cp\u003eThe PLJ series MAF-sensors differ from the factory-installed air flow meters in that they do not have a throttle valve but instead measure the airflow using the hot film principle. This provides a significantly larger cross-section for the intake air. Combined with the fast and modern evaluation electronics, this leads to increased performance.\u003c\/p\u003e\u003cp\u003eThe engine control unit (ECU) is always provided with accurate values, which prevents any increased strain on the engine components.\u003c\/p\u003e\u003ch3\u003eKey Features \u0026amp; Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eIncreased engine power and torque throughout the entire RPM range\u003c\/li\u003e\n\u003cli\u003eImproved engine operation, especially at low RPMs\u003c\/li\u003e\n\u003cli\u003eSignificantly enhanced throttle response\u003c\/li\u003e\n\u003cli\u003eCompletely wear-free due to electronic measuring principle\u003c\/li\u003e\n\u003cli\u003eReduced fuel consumption and emissions\u003c\/li\u003e\n\u003cli\u003eWeight savings of approximately 1.5 kg compared to the original part due to the use of carbon fiber materials\u003c\/li\u003e\n\u003cli\u003eFull compensation of air density (altitude correction)\u003c\/li\u003e\n\u003cli\u003eEasy \"plug and play\" installation (no calibration required)\u003c\/li\u003e\n\u003cli\u003eCO-calibration via calibration screw\u003c\/li\u003e\n\u003cli\u003eReversible installation at any time\u003c\/li\u003e\n\u003cli\u003eSVE air mass meters can be used within the AEC standard temperature range of -40°C to 105°C and are resistant to oil, fuel, and temperature\u003c\/li\u003e\n\u003cli\u003eFully manufactured in Germany\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eImportant Fitment Notes\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eFor Volkswagen Jetta 1.8 1988-1992.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePlease comply with local regulations regarding the installation of performance-enhancing engine components.\u003c\/p\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003cdiv style=\"overflow-x:auto\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVehicle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eVolkswagen Jetta 1.8 1988-1992\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePLJ-04-106-Jetta\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSensor type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eHot-film mass air flow sensor (replaces flap-type air flow meter)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePlug and play, no ECU calibration required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOperating temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e-40 °C to 105 °C (AEC standard)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eReplaces Bosch OEM\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0 280 202 106, 0 280 202 107\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eReplaces VW OEM\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e037 906 301\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eManufacturer\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStorch Vehicle Electronics, Germany\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"STORCH VE","offers":[{"title":"Default Title","offer_id":43845940543549,"sku":"PLJ-04-106-Jetta","price":558.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0898\/5024\/files\/106-3_6afcc035-0022-4e70-9346-6068ba46a444.jpg?v=1792349919"},{"product_id":"storch-plj-maf-kit-volkswagen-passat-1-8-2-0-1988-1994-plj-04-106-passat","title":"Storch PLJ MAF Kit - Volkswagen Passat 1.8 \/ 2.0 1988-1994 (PLJ-04-106-Passat)","description":"\u003cp\u003eStorch PLJ hot-film MAF kit for the \u003cstrong\u003eVolkswagen Passat 1.8 \/ 2.0 1988-1994\u003c\/strong\u003e. Replaces the factory flap-type air flow meter with a modern hot-film sensor for a larger intake cross-section, sharper throttle response and more power across the rev range. Made in Germany by Storch Vehicle Electronics.\u003c\/p\u003e\u003cp\u003eThe PLJ series MAF-sensors differ from the factory-installed air flow meters in that they do not have a throttle valve but instead measure the airflow using the hot film principle. This provides a significantly larger cross-section for the intake air. Combined with the fast and modern evaluation electronics, this leads to increased performance.\u003c\/p\u003e\u003cp\u003eThe engine control unit (ECU) is always provided with accurate values, which prevents any increased strain on the engine components.\u003c\/p\u003e\u003ch3\u003eKey Features \u0026amp; Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eIncreased engine power and torque throughout the entire RPM range\u003c\/li\u003e\n\u003cli\u003eImproved engine operation, especially at low RPMs\u003c\/li\u003e\n\u003cli\u003eSignificantly enhanced throttle response\u003c\/li\u003e\n\u003cli\u003eCompletely wear-free due to electronic measuring principle\u003c\/li\u003e\n\u003cli\u003eReduced fuel consumption and emissions\u003c\/li\u003e\n\u003cli\u003eWeight savings of approximately 1.5 kg compared to the original part\u003c\/li\u003e\n\u003cli\u003eFull compensation of air density (altitude correction)\u003c\/li\u003e\n\u003cli\u003eEasy \"plug and play\" installation (no calibration required)\u003c\/li\u003e\n\u003cli\u003eCO-calibration via calibration screw\u003c\/li\u003e\n\u003cli\u003eReversible installation at any time\u003c\/li\u003e\n\u003cli\u003eSVE air mass meters can be used within the AEC standard temperature range of -40°C to 105°C and are resistant to oil, fuel, and temperature\u003c\/li\u003e\n\u003cli\u003eFully manufactured in Germany\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eImportant Fitment Notes\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eFor Volkswagen Passat 1.8 \/ 2.0 1988-1994.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePlease comply with local regulations regarding the installation of performance-enhancing engine components.\u003c\/p\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003cdiv style=\"overflow-x:auto\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVehicle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eVolkswagen Passat 1.8 \/ 2.0 1988-1994\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePLJ-04-106-Passat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSensor type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eHot-film mass air flow sensor (replaces flap-type air flow meter)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePlug and play, no ECU calibration required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOperating temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e-40 °C to 105 °C (AEC standard)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eReplaces Bosch OEM\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0 280 202 106, 0 280 202 107\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eReplaces VW OEM\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e037 906 301\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eManufacturer\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStorch Vehicle Electronics, Germany\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"STORCH VE","offers":[{"title":"Default Title","offer_id":43845940576317,"sku":"PLJ-04-106-Passat","price":558.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0898\/5024\/files\/106-3_3f9759fe-01b1-42d3-b849-e3e1310d24fd.jpg?v=1792349920"},{"product_id":"storch-plj-maf-kit-volkswagen-t3-2-1-plj-04-079","title":"Storch PLJ MAF Kit - Volkswagen T3 2.1 (PLJ-04-079)","description":"\u003cp\u003eStorch PLJ hot-film MAF kit for the \u003cstrong\u003eVolkswagen T3 2.1\u003c\/strong\u003e. Replaces the factory flap-type air flow meter with a modern hot-film sensor for a larger intake cross-section, sharper throttle response and more power across the rev range. Made in Germany by Storch Vehicle Electronics.\u003c\/p\u003e\u003cp\u003eThe PLJ series MAF-sensors differ from the factory-installed air flow meters in that they do not have a throttle valve but instead measure the airflow using the hot film principle. This provides a significantly larger cross-section for the intake air. Combined with the fast and modern evaluation electronics, this leads to increased performance.\u003c\/p\u003e\u003cp\u003eThe engine control unit (ECU) is always provided with accurate values, which prevents any increased strain on the engine components.\u003c\/p\u003e\u003ch3\u003eKey Features \u0026amp; Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eIncreased engine power and torque throughout the entire RPM range\u003c\/li\u003e\n\u003cli\u003eImproved engine operation, especially at low RPMs\u003c\/li\u003e\n\u003cli\u003eSignificantly enhanced throttle response\u003c\/li\u003e\n\u003cli\u003eCompletely wear-free due to electronic measuring principle\u003c\/li\u003e\n\u003cli\u003eReduced fuel consumption and emissions\u003c\/li\u003e\n\u003cli\u003eWeight savings of approximately 1.5 kg compared to the original part due to the use of carbon fiber materials\u003c\/li\u003e\n\u003cli\u003eFull compensation of air density (altitude correction)\u003c\/li\u003e\n\u003cli\u003eEasy \"plug and play\" installation (no calibration required)\u003c\/li\u003e\n\u003cli\u003eCO-calibration via calibration screw\u003c\/li\u003e\n\u003cli\u003eReversible installation at any time\u003c\/li\u003e\n\u003cli\u003eSVE air mass meters can be used within the AEC standard temperature range of -40°C to 105°C and are resistant to oil, fuel, and temperature\u003c\/li\u003e\n\u003cli\u003eFully manufactured in Germany\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eImportant Fitment Notes\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eFor Volkswagen T3 2.1.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePlease comply with local regulations regarding the installation of performance-enhancing engine components.\u003c\/p\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003cdiv style=\"overflow-x:auto\"\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVehicle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eVolkswagen T3 2.1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePLJ-04-079\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSensor type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eHot-film mass air flow sensor (replaces flap-type air flow meter)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePlug and play, no ECU calibration required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOperating temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e-40 °C to 105 °C (AEC standard)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eReplaces Bosch OEM\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0 280 202 079\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eReplaces Volkswagen OEM\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e025 906 301 C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eManufacturer\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStorch Vehicle Electronics, Germany\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/div\u003e","brand":"STORCH VE","offers":[{"title":"Default Title","offer_id":43845940609085,"sku":"PLJ-04-079","price":558.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0898\/5024\/files\/079-3.jpg?v=1792349921"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0898\/5024\/collections\/storchve.jpg?v=1792350270","url":"https:\/\/www.euromotiv.com\/collections\/storch-ve.oembed","provider":"Euromotiv","version":"1.0","type":"link"}