Skip to content

Porsche Control Arm – Rear Upper Forrward 99333104703

Availability:
Out of stock
SKU 99333104703
Sold out
Original price $346.75 - Original price $346.75
Original price
$346.75
$346.75 - $346.75
Current price $346.75
CALIFORNIA WARNING

Handling passenger or off-highway motor vehicle parts can expose you to chemicals such as phthalates and lead, which can cause cancer and reproductive harm. To minimize exposure, service the vehicle in a well-ventilated area, wear gloves, and wash your hands. For more information see www.P65Warnings.ca.gov/motor-vehicle-parts.

Rewards
EARN REWARD POINTS
Purchasing this product will earn you 1730 points to redeem on future purchases. Check your points.

Control arms are integral parts of your vehicle’s suspension, which links the chassis and the wheels together, and contributes to the vehicle’s handling, stability and ride quality while driving. The suspension’s other purpose is to keep the wheels in contact with the road surface as much as possible to maintain control of the vehicle during acceleration and braking, despite changes in road surface. Control arms generally consist of a hinged suspension link with a single pivot point at one end, which houses a control arm bushing. This allows a predefined range of motion at a fixed distance from the mount point on the chassis. While there is no specific mileage requirement to replace your vehicle’s control arms, over time the rubber bushings will wear and get loose, so check them periodically. Bushings generally need to be pressed in, so sometimes buying the entire control arm aids in ease of installation.

Brand Part #
Brand Part #
Porsche 993 331 047 03 / 99333104703
  • Replaces: 993-331-047-00, 993-331-047-02
  • Position: Left Rear, Left Front, Right Rear, Right Front
  • Part can be found as reference #3 in illustration.
  • Fitment Notes: Rear. 911. Front.

This part also goes by the following cross reference.

Cross Reference Part Number: 99333104700, 993-331-047-00, 99333104702, 993-331-047-02

Fits These Vehicles 7 applications
Porsche
Make Model Engine Years
Porsche 911Carrera 3.6H6 1995–1998
Porsche 911Carrera 4 3.6H6 1995–1998
Porsche 911Carrera S 3.6H6 1998–1998
Porsche 911Carrera 4S 3.6H6 1996–1998
Porsche 911Targa 3.6H6 1996–1998
Porsche 911Turbo 3.6H6 1996–1997
Porsche 911Turbo S 3.6H6 1997–1997
Fits 7 vehicle applications Check vehicle fitment before ordering View fitment

About this Control Arm

The GENUINE PORSCHE 99333104703 control arm links the wheel hub to the car's body or subframe, holding the wheel in position while letting the suspension move. Its bushings and ball joint wear over time, which affects steering precision, tire wear and noise.

Frequently asked questions

What does a control arm do?

It locates the wheel and controls its movement as the suspension travels, keeping alignment angles consistent. Bushings at the body end and a ball joint at the wheel end allow that movement while absorbing vibration.

What are the signs of a worn control arm?

Clunking over bumps, vague or wandering steering, vibration through the steering wheel, uneven tire wear, cracked or torn bushings, or play in the ball joint.

Should I replace control arms in pairs?

Replacing both sides of the same axle keeps handling balanced, and when one side is worn the other is often close behind. Many owners replace related arms and bushings at the same time.

Is anything special needed during installation?

Tighten the bushing bolts with the car at normal ride height, not with the suspension hanging, or the bushings will be pre-loaded and wear early. Use new bolts or nuts where the manufacturer specifies it, and have an alignment done afterwards.

How do I make sure this control arm fits my car?

Compare the part numbers listed on this page with the number on your old part or in your vehicle's parts catalog, and check the fitment information. If you are unsure, contact us with your VIN before ordering.