Skip to content
Schrick 308° Intake Camshaft - BMW S14 (0227D1080-01)

Schrick 308° Intake Camshaft - BMW S14 (0227D1080-01)

Schrick
Availability:
5+ in stock, ready to be shipped

Ships in 5–7 business days

SKU 0227D1080-01
$1,619.99 - $1,619.99
$1,619.99
$1,619.99 - $1,619.99
$1,619.99
CALIFORNIA WARNING

Handling passenger or off-highway motor vehicle parts can expose you to chemicals such as phthalates and lead, which can cause cancer and reproductive harm. To minimize exposure, service the vehicle in a well-ventilated area, wear gloves, and wash your hands. For more information see www.P65Warnings.ca.gov/motor-vehicle-parts.

Rewards
EARN REWARD POINTS
Purchasing this product will earn you 8095 points to redeem on future purchases. Check your points.

Schrick 308° camshaft for the BMW S14 4 cyl., 4 valve, engine. Machined by AVL Schrick in Remscheid, Germany, this profile raises valve lift to 12.2 mm for greater cylinder filling and top-end power over the factory camshaft.

Key Features & Benefits

  • 308° duration — 277° measured at 1 mm lift
  • 12.2 mm valve lift (12.2 mm cam lobe lift)
  • 0.25 mm valve clearance — solid lash, mechanical adjustment
  • Made by Schrick, OE supplier and motorsport camshaft specialist

Important Fitment Notes

Stössel 022713805 erforderlich!.

Technical Specifications

Brand BMW
Engine S14 4 cyl., 4 valve,
Duration intake 308°
Duration intake @ 1 mm 277°
Duration exhaust 308°
Duration exhaust @ 1 mm 277°
Intake peak timing 102°
Exhaust peak timing 102塡
Cam lobe lift intake 12.2 mm
Cam lobe lift exhaust 12.2 mm
Valve lift without valve clearance intake 12.2 mm
Valve lift without valve clearance 12.2 mm
Valve clearance intake 0.25 mm
Valve clearance exhaust 0.3 mm
Intake opens 52°
Intake closes 76°
Exhaust opens 76°
Exhaust closes 52°
Intake opens @ 1 mm (EM) 1 -33°
Intake closes @ 1 mm (EM) 1 245°
Exhaust opens @ 1 mm (AM) 1 -245°
Exhaust closes @ 1 mm (AM) 1 33°
Valve lift @ TDC intake (EM) 1 5.5 mm
Valve lift @ TDC exhaust (AM) 1 5.5 mm

Installation Notes

Professional installation recommended. Camshaft timing must be set to the specification above; refer to the Schrick data sheet for the full timing diagram.

Download the Schrick data sheet (PDF) — part 0227D1080-01.

This part also goes by the following cross reference.

Cross Reference Part Number:

About this Camshaft

The Schrick 0227D1080-01 camshaft opens and closes the engine's valves in time with the pistons. The shape of its lobes sets how far and for how long each valve opens, which shapes the engine's power delivery.

Frequently asked questions

What does a camshaft do?

As it turns, its lobes push the valves open, directly or through followers or rocker arms, then let the springs close them. Lift and duration determine how much air the engine can breathe.

What are the signs of a worn camshaft?

A ticking or tapping from the top of the engine, loss of power, misfires, and visibly worn or pitted lobes when inspected. Metal particles in the oil can also point to cam or follower wear.

Will a performance camshaft need other upgrades?

Often. More aggressive camshafts may need stronger valve springs, adjusted valve timing and an engine tune to run properly. Check the maker's requirements in the product details.

Can I install a camshaft myself?

It requires removing the timing drive, locking the engine at the correct timing with engine-specific tools and setting the timing precisely. Mistakes can damage the valves and pistons, so it is best done by an experienced technician.

How do I make sure this camshaft fits my car?

Compare the part numbers listed on this page with the number on your old part or in your vehicle's parts catalog, and check the fitment information. If you are unsure, contact us with your VIN before ordering.

Euromotiv is an independent retailer of OEM, Genuine, and aftermarket automotive parts. We are not affiliated with, endorsed by, or authorized by Audi AG, Volkswagen AG, BMW AG, Mercedes-Benz Group AG, Dr. Ing. h.c. F. Porsche AG, MINI, or any other vehicle manufacturer. All trademarks, logos, and brand names are the property of their respective owners and are used solely for identification and compatibility purposes.